Ferrite Chokes on ALL pwer cables-bad?


I have installed probably eight Ferrite Chokes on my power cords as a effort to lower the noise floor as much as possible. After installing the chokes the system did quite down slightly, however I'm not sure if I'm imagining it, but the sound may be a bit muffled. My system does use an AC enhancer and the chokes are installed as close to the power input as possible. Your thoughts?
Thanks,
Rpg
rpg
Yes they can 'muffle' the sound. The more stuff you use to 'purify' or 'clean' the power, the more likely you are to also cause problems from to much. usually ONE type of cleaner, or purifying per. adding stuff up on the same equipment is generally difficult. Even some special cords added to purifiers can be too much.
"In all things moderation".
It may be just a few of the chokes are causing a probelm... time to fool around with them
Rpg, do you have dedicated lines for your audio gear? If not, this is highly recommended, with dedicated lines and quality outlets you should not need ferrite chokes and the noise floor should not be an issue.

Cheers,
John
I have a dedicated line for my system, high quality Hospital grade isolated ground outlet. I'm thinking, as I have a power conditioner that all my gear plugs into, to start over and observe one at a time as I add chokes which ones help vs which ones don't. Thanks!
Rpg