Power cable for Sony SCD-XA5400ES

Is the cable end/Sony in the same IEC standard size, just with two prongs? OR is the powercable end in a smaller two pin with the cable end rubber like a figure ""8"" ?
IF it is an IEC that looks like the "8" with two pins that is an IEC "C7" connector.
Pangea make a decent inexpensive power cable with the C7 end available at Audio Advisor ($25. shorter one, to about $85 for a long 'better' one)
IF it is a standard IEC but just with two prongs, you can use any ordinary three prong cord, it does not matter if the third slot remains empty.
I own a Technics DVD A player wiith the C7 for the A/C connector.

I suggest a Synergistic Research Tesla T2. Remarkable cord for $650 new or $400 used. You want the ultimate, go up to the Hologram D for $2600 new or $1600 used. You will not look at another cord again...

Regards Bacardi

Thanks so much guys. It't not a C7. I took the three prong off of the computer and it does work , so it looks like that is it. On closer examination, one side is marked N and the other is L, so the plug is polarized with proper polarity directed by the asymmetry resulting from the bevels.

Buy PS Audio PerfectWave 3 with removable ground pin ($120).
and You are good to go. I have Sony 5400 and that power cable is more than good. Forget about $1000000.00 cables.