Mapeshade cable lifts or any cable lifts?

I never found them to do anything at all...I have unshielded cables.

Stringreen:

I see we have an honest person amoung us!

So Griffithds, you can't hear anything either?
(JUST as insulting as your comment i guess, in it's own snide way)
Tweaks that cost nothing are not going to cost anyone to find out if they, in fact, can or cannot hear a result.
And just because YOU can't hear worth a damn*, does not mean no one else can.
*(or have equipment with enough subtlies to allow one to hear the difference)
Good luck

For another interesting (cheap) way to hold a cable off the floor i use a thin pure cotton rope woven back and forth in a simple loose pattern around the two wires of my 7 meter long Kimber Hero pre to amp interconnect. It holds the wires together both the width of the rope diameter apart, and off the floor the diameter of the rope, as the cable snakes it's way behind/over some other stuff in the way on it's route to the amp.
The rope was laying around too.
(If i would have bothered to dye the rope black it might have been less noticeable..
As for hearing a difference, you should try the tweak with some really cheap or free method before splurging for an expensive method of doing the tweak.
The free or nearly free method is almost always just as good as the pricey ones, just perhaps not as elegant.
It is true many peole do not think it is worth the bother. And also true many folks do not hear any difference. But to insult the people who do is insufferable IMO.

I've never heard the differnce between putting something between the cable and not putting something between the cable.
I've tried several inexpensive tweeks like that and I didn't notice any difference.
Some people hear the difference, but I haven't.