Most Beneficial Cable Upgrade


All things being equal, which cable upgrade would have the greatest sonic impact/improvement on a high end audio (stereo) system?
1)Power cables
2)Speaker cables
3)Interconnects
I have heard that power cables have the greatest benefit due to their ability to reduce RFI (radio frequency interference).
Does anyone know the answer to this question?
matjet
Pcoombs, you don't need a microphone for your comparison. The room and the microphone add too much coloration and don't add anything positive to the comparison. Simply plug the power cords into an amp or preamp and record thru the tape out circuit. You can even make alllowances for the power cord to settle in and then A/B to your heart's delight.

But some people think A/B comparisons are a problem.
a/bs have been discredited
and
a/b issue is loaded with difficulties because i do not think it is possible to absolutely control the variables
I suggest that you lack the imagination to design a limited variable A/B comparison. It's easily done. (I will admit that your use of the word "absolutely" does give you wiggle room.) The hard part, as with most experiments, is interpreting and drawing conclusions from the data.

Recording engineers use A/B comparisons every day. Which mic to use with this vocalists? Do a few test recordings with different mics and A/B listen to the results. It doesn't take days. At what level should the lead vocal be placed in the mix? Do a few different mixes while varying the vocal level and then A/B listen for what you think sounds right. There are nearly a countless number of decision like these in any recording sessions and engineers/producers/musicians rely upon an A/B comparison to determine what sound they want to use. And they don't take days to do it.
i was talking about trying to do a/bs in the typical hobbiests listening room. it is not easily done. ever hear about coloration caused by other speakers in the room? look at the set up required by the people that have attempted it in the past..none have been conclusive either. use your great imagination and you might be able to figure something out given your incredible brain power. and I havn,t seen any recording engineers chiming in on ac cords on their living room gear here lately. wiggle on that. the hard part is not in drawing conclusions. any idiot can do that as your post exhibits. the scientist knows that controlling the experiment is the part that is crucial. google "scientific process" if you want to inform yourself.then accurately measure the results with bias removed. a/bs have been discredited. this is a fact. where have you been. as for recording this on a tape deck which one would you use? is it 1978 and you are gonna use a pioneer ctf500? ha. even the best nakamichi or tandberg can,t make a tape good enough to settle this w/o argument. ever heard about bias/eq issues? or head alignment? what tape would you use? when was the last time you cleaned/demagnitized the deck? do you know what you are even doing? we are talking about cables performance and now we are going to measure it on antique technology? no wonder few get it. yeah i,m gonna listen and evaluate ac cords on a tape decks recordings to listen for nuances and inner musical detail. thats laughable. if you can,t hear the difference listening no a/bs or reading or gurus are going to help you. stick with stock cords they are wonderful and you don,t need anything better it is a waste of money and snake oil. ha, right...
If you hear a difference, fine (I always do). If you do not, that's fine too. However, there are many skeptics in these forums who I feel have never tried these changes, so their opinions should not be voiced. This audio game is all about "listening".
yeah you are mistaken. typical person that throws some stuff but can,t take any. ha a/b that