needs to be RCA.
interconnects specifically for speaker drivers
I have an active x-over that has seperate channels for the tweeter, midrange and woofers and hence I need 3 pairs of interconnects. In experimenting with different interconnects I can tell there strenghts and weaknesses as I try them on the different drivers. As you can imagine a interconnect that is warm souding is not great on the woofers. What I would like to do is get 3 sets custom made or use a vendor that has a range of models. This way each set can be optimized - highend smooth and silky; midrange lush and rich; lowend tight and accurate. Any advice on the approach for doing this or recommendations on people or manufacturers would be great. Thanks.
- ...
- 8 posts total
I looked up these options but I don't know how good they are: http://www.crutchfield.com/S-JaF5nernMxT/p_142AMYC/EFX-Y-adapter.html http://www.cablestogo.com/product.asp?cat_id=118&sku=40650# Hope it helps. All the best, Nonoise |
I would call Pro Audio LA and have them make you some custom Mogami 1 into 3 interconnect cables. You can have them put on what ever connectors you want on them (I had them use Neutrik Pro-Fi connectors on mine). Try to get as close as possible to the Mogami 2549 specs for unbalanced RCA, which follows: Specifications: No. of Conductor: 2 Conductor:Details: 30/0.08 OFCSize(mm(2)): 0.339mm(2) (#22 AWG) Insulation:Ov. Dia.(mm): 1.9 diameter (0.075")Material: XLPE (Cross-Linked Polyethylene)Colors: Blue / Clear Shield: Served Approx. 64/0.18A Jacket:Ov. Dia.(mm): 6.0i (0.236")Material: Flexible PVCColors: Black / Red / Yellow / Green / Blue Roll Sizes:50m (164 Ft)100m (328Ft)200m (656Ft) Weight per 200m Roll: 11kg Electrical & Mechanical Characteristics: DC Resistance at 20C:Inner Cond.: 0.058W/m(0.018W/Ft)Shield: 0.013W/m(0.004W/Ft) Capacitance at 1kHz, 20C (Partial C. Value) See below figure*:K0: 76pF/m(23pF/Ft)K1: 11pF/m(3.4pF/Ft) Inductance between conductors at 1kHz. 20C: 0.8H/m(0.24H/Ft) Electrostatic Noise**: 50mV Max. Electromagnetic Noise**: 0.15mV Max. Microphonics at 50KW Load**: 30m V Max. Voltage Breakdown: Must withstand at DC 125V/15sec. Insulation Resistance: 100000 M W m Min. at DC 125V, 20C Flex Life**: 14,500 cycles Tensile Strength: 657N Emigration: Non-emigrant to ABS Applicable Temperature: -20C~ +70C(-4F~ +158F) If you need to go balanced, use Mogami 2534 or whatever is closest for the 1 into 3 split. |
- 8 posts total