F I M Speaker Cables


How good are these cables more interested on the gold series Thanks
accel
Well put Mikeam, I haven't heard of this before. I doubt that there is little if any horizontal deflection with my equipment stands. I can attest that I have a system full of FIM Gold cables, along with JM Labs for the past 19 to 20 months without ANY problem what so ever. The FIM is a stiff cable which requires proper installation, taking adequate time to bend the cable into position. After reading this post, I've checked the heavy duty IEC connectors on the back of my Tube Research 100 and it still is tight within the connection, as well within its' mounting.

My Utopia tweeters are still working fine and I'm very pleased with the complete line of FIM Gold series cable.
SD, I am sorry to hear that those highschool shop class quality FIM connectors caused you so much problem. Next time, ask those high school students to provide some type of screw on attachment, so the FIM cable can be screwed to the frame of the component's iec input.

Then again, screw the whole component that is connected to a FIM cord onto the stand which it sits on to make sure it doesn't flow off the shelf when the FIM cord "unbends" itself. Then again, screw the whole stand onto the ground it sits on...
Actually, maybe it's that you have lightweight components, Viggen. You know, where the power cord weighs more than the component, like Aragon. If you read the above posts, it sounds more like an IEC jack failure on the component end.
Sgroves,

I am not the person with problems with FIM powercords.

Also, the lightest Aragon amp is 47lbs; 6 feet powercords are not over 47lbs at least not mine.

And, Sd states the problem is with the jigglers and the stiffness of FIM cords not iec connections.
That's funny, Viggen. I've owned FIM Gold series cable nearly 2 years with NO problems what so ever. (Of course, my mono blocks weigh over 130 pounds each). I should also add that thousands have owned FIM cables with no problems, (otherwise they'd have posted here). I'm guessing that since you remark about Adcom and Aragon, you haven't used nor seen FIM. This said, how valid are your comments? Try nill. Nothing. Nada.

By the way, I own JM Lab Utopias, (the same tweeter), maybe, that SDRCONSULT says blows with FIM. I've used them for the past 20 months WITH JM Lab Utopias without any problems. Same is true with 5 other FIM/Utopia owners that I know. I HAVE experience. You do not.

FIM is not Audioquest. Thank God.

Good day to you, Sir!