Need good Component Video Cables


Just bought a Sony DVP-S9000ES player and a 55" Mitsubishi Diamond series HD-ready TV. I bought some monster cable just so I could hook it up out of the store, then I upgraded to a run of Transparent. The picture now has a slight overshadow (ghosting?) to it. I've tried rearranging cables and power cords, but to no avail. I know it is the component cable, because when I use the Monster cable the image has no shadow. $60 Monster cable bested $300 Transparent, go figure. Can someone recommend a good, shielded, component video cable--a 3 meter run--that is priced between $500 and $1000? Thanks.
argent
Sorry to tell you but you don't need to spend lots of money on cables to get good video performance. I own and operate a video editing and media duplication company that not only has several runs of component video connections in our video editing rooms; but also have hundreds of video connections in our duplication operations. We make our own video cables using Canare video cable and connectors; as well as some Belden video cable and Kings connectors. For about $350.00 you can get a complete set of Canare Tools to cut, strip, and crimp your own video cables - as well as enough connectors and cable to last you for many years. You can buy Canare Tools, cable, and connectors from most commercial electronics companies. Also, I should mention that Canare is one of the few comapnies that makes a first rate RCA video connector that can be crimped (rather than soldered - which is the point where most consumer video cables fail). Good luck!
I have a set of Virtual Dynamics Reference Component Cables and they were a big improvement over Monster cables that I started out with.

Gerry
Actually one of the better "secrets" in component cables are by of all people "Outlaw". They are one of only 3 companies I know of that use a solid silver core {not silver plated} design. Out of the three companies , they are the most price friendly.
Re read your post, and Im not sure If the Outlaws are shielded or not, but IMO it does not matter. Whatever brand you go with, take great care to make sure none of your powercords {like from a cable box or the TV itself for that matter} are touching and of your video related cables. Much cleaner picture quality in my experience.
A good and low cost option is RG-6U cable. No need to spend big money on video cables.