Whoa Ezmerelda, Since scientists cannot explain all phenominon that occur, why deny the possibility of their existence. As far as these wires being overpriced and the money better spent on amplification, I am in your camp on that, if you have read my posts on wire.
Where I run into trouble with "scientific" types, is the steadfast hardheaded implication that "There exists no means by which a difference could occur sonically, so no difference can exist".
The example of plating above that I mentioned, was in my own experience as well. Here is the story. In 1990, I purchased the brilliantly engineered WELL TEMPERED Turntable and arm for use with my reference system. I had never before heard sound so correct, so right, so master tape like. It was a breakthrough in my mind. I could also discern which rooms were using this new marvel, at the shows, from the hallway!! I am not kidding. The price vs performance were so sky high, that the following year I bought another one for use with a different cartridge. I decided to remove the reference Cello MC from my current unit and put it on my newly aquired one. The two units were IDENTICAL, but the new one (1991),was about 25% better sounding in all areas. I immidiately called the factory and wanted to know what was different. "Oh nothing really, just the jacks on the termination box. They are now Cardas".
The fact is that the special copper/plating process that yields only marginal measurement changes, if barely any, was enough to change my system drastically for the better. I'm not picking a fight with you, just pointing out the truth of the subject, to MY ears, and a number of many other reliable ears that I confirm my findings with.
But I must say, regarding cable prices, I find them obsene and completely ridiculous, but their contribution to our musical present cannot be denied. I am quite certain that in actual materials, most of them could cost a fraction......Frank
Where I run into trouble with "scientific" types, is the steadfast hardheaded implication that "There exists no means by which a difference could occur sonically, so no difference can exist".
The example of plating above that I mentioned, was in my own experience as well. Here is the story. In 1990, I purchased the brilliantly engineered WELL TEMPERED Turntable and arm for use with my reference system. I had never before heard sound so correct, so right, so master tape like. It was a breakthrough in my mind. I could also discern which rooms were using this new marvel, at the shows, from the hallway!! I am not kidding. The price vs performance were so sky high, that the following year I bought another one for use with a different cartridge. I decided to remove the reference Cello MC from my current unit and put it on my newly aquired one. The two units were IDENTICAL, but the new one (1991),was about 25% better sounding in all areas. I immidiately called the factory and wanted to know what was different. "Oh nothing really, just the jacks on the termination box. They are now Cardas".
The fact is that the special copper/plating process that yields only marginal measurement changes, if barely any, was enough to change my system drastically for the better. I'm not picking a fight with you, just pointing out the truth of the subject, to MY ears, and a number of many other reliable ears that I confirm my findings with.
But I must say, regarding cable prices, I find them obsene and completely ridiculous, but their contribution to our musical present cannot be denied. I am quite certain that in actual materials, most of them could cost a fraction......Frank