thorens 160

You can check this web site.

http://www.theanalogdept.com/

or http://www.audioasylum.com/audio/vinyl/bbs.html

for more information.

Ryan

The Thorens is a pretty good turntable. The weakest point is the tonearm. Viridian gives good advice above. I would add that you should use a med-high compliance cartridge with it, since the tonearm bearings are not the greatest. Medium to high compliance cartridges will not stress this weakness in the arm and sound better overall in that package. Vinyl rules!

well the table is here, and somewhere along the line the motor shaft seems to be bent and I get some noise from the belt roaming about on the plastic shaft. Some have said to oil it and it might "straighen up" and spin right. I guess I can live with some noise, as replacing the motor is probably a hassle not to mention expensive. Otherwise it looks good, the arm is OK. I am thinking about putting an SME 3009 arm on it. Any ideas or thoughts are appreciated?

Jon: Are you certain that the shaft is bent? Not to doubt you, but I get the impression that you are new to TT's and I have never seen this happen before.

If it is, then I think that you are correct (a motor replacement is in order).

If you already own a 3009, which model is it? I am using a 3009II on a TD125II with good results. The 3009II (non-improved) has enough mass to work well with a variety of cartridges, which is nice. I would not bother mounting a good arm to the table if the problem you describe is not remedied.

Anyway, the bearing should be cleaned out (I use electrician's alcohol and Q-Tips) and refilled (I use Singer's sewing machine oil, not their multi/purpose oil).

You can also try cleaning the belt, the plastic roller and the platter wall, where the belt rides, (electrician's alcohal again) and then lightly powder the belt with talc (shaking off any excess). If you still hear a slight clicking or rustle from the plastic roller try switching speeds back and forth and if this does not work lift up the platter and lightly tap (or depress) the spindle and the roller assembly (it is spring mounted) as this will sometimes get rid of or reduce the noise.

I am sorry to hear that the table is damaged in some way and do not know the availabilty of replacement motors (if this is what it needs). Why not try asking in the Vinyl Forum @ audioasylum.com?

I often see TD160's go for well under $200 in good "stated" condition and though it is your money, this might be the best way to go (depending on what the problem is). A properly working 160 or 160II with a good arm (such as the 3009II) is still very competative (sound wise) against the new (up to $1K) TT's.

Please keep us updated and do try the Audio Asylum forum.

FWIW there is nothing wrong with the stock 160 tonearm as long as the proper cartridge is used and it functions correctly. IMHO. The tonearm on the 125/126 is even better. I would leave things alone tonearm - wise until you get things sorted out.