"Beginner" audiophile Turntable for $200-$300?


I'm yet another "newbie" wanting to listen to my long-time stale album collection (primarily pop). I don't see myself being a tweaker, at least in the beginning - I just want a "plug & play" turntable, I suppose, for now. I just want to set it up and play my albums - but I do want the most accurate reproducibility of the information on my albums as I can get with $200-$300 (my budget, more or less).

It's the techie/perfectionist in me to make sure that I get a good deal (which means I can upgrade parts - rather than the whole thing...so that I could spread the costs across many paychecks ;-). This is how many of my other hobbies are (Ham Radio, PCs, etc.).

It would seem that if I only wanted "plug & play", and since I'm just a newbie in this, I would go with the less expensive Music Hall MMF-2.1 (which is NOT upgradeable). No one recommends the even less expensive Sony PS-LX350H (or anything from Sony) which is where I began my journey researching this topic. The MMF-2.1 seems to be THE entry-level/beginner audiophile turntable. But, based on reviews and posts, I'm worried about Music Hall's apparent lack of quality workmanship throughout; lack of a good manual (especially for a newbie that doesn't know how to properly setup a more "audiophile" like, manual turntable); and the fact that "just" another $100 (or so) would get me a much better sounding turntable (based on my research so far) that is at least somewhat upgradeable (NAD 533).

The reviews and posts on the NAD 533 are much better than for the MMF-2.1 - and I understand that the tone arm is "basically" a Rega RB-250. In deed, the entire turntable is OEM'd by Rega for NAD and is slightly different than a Rega P2. Based on reviews & posts, I also plan to upgrade to a better cartridge than the one that comes with the NAD 533 - but that's another $100! ARGGG!!!! Oh well, maybe later (I just want very good reproducibility - so I lean toward purchasing a new cartridge before I spend any effort on listening or transferring my album collection to CD - at least for in-car listening).

The VPI HW-19 Jr looks like the ultimate in upgradeability, especially in that it can be upgraded to a full-blown TNT Series 5! But, I cannot see paying $600/$650 (at the minimum, for a used one) right now.

So, I'm strongly leaning toward the NAD 533 for now!

I appreciate any suggestions/recommendations/feedback.

Thanks,

Wes
wlusk5fd8
I'm in the exact same boat as Jim with the same hesitations and budget. What about the Regas running 1% fast? How does that affect the sound? What about the MH 2.1's arm, I know it can't compare to the rega's, but again how does that affect the sound? Last question, will I be able to just sit back and enjoy the music or will motor rumble and budget cartridge really detract from the sound? These are all concerns Ive seen posted on this site and others like it.I want to get into vinyl, to discover music thats out of print. I want it to equal or better my cd setup. Cuz thats what it comes down to, the music coming through right?
Wes, I was very clear about the SL-BD22. Kevin Barrett of KAB electroacoustics has told me it should be up there with anything up to $700 retail. Read the ongoing thread about turntable power supplies and you'll understand better. Speed and rotational stability is crucial. The BD22 has a *frequency generator servo*. Its speed will be more accurate that that of its competitors.
Again, thank you everyone for your assistance and kindness!

Jim, I appreciate the offer. If/when I make it down to San Antonio again, I might just take you up on your kind offer! ;-) Based on the assistance I've gotten from this message forum already, I would probably come here first for used equipment. For now, I'm just afraid of what I might get (without the proper knowledge) in the used equipment arena...especially since I'm just an analog/turntable beginner (including proper tweaking knowledge). ;-)

Albertporter, I live in the DFW area (south of Dallas, for now) - so I might just take you up on your offer. Something I have been looking for, unsuccessfully (albeit, I haven't really tried that hard as of yet), is a local store that carries turntables so that I might be able to listen to some of the turntables that I've got on my list ("beginner" audiophile) - to help me decide (and to possibly purchase from locally, and learn more from, etc. ;-).

Psychicanimal, well you don't have to get "snippy" (sp?) about it! I was honestly asking the question of you. But, since the sound coming from the turntable is more important than specs alone, it's interesting that, as I posted earlier, a reveiwer at epinions.com posted that after replacing his Technics SL-BD22 with a NAD 533 (which costs ~$400 new), it was a "major improvement!". Now I'm assuming he means in sound quality. :-)

Regards,

Wes
Wes, Im in the same boat you are and still none of the very pertinent questions I asked above have been answered. Oh well so much for help. I might go pick up an MMF 5 tomorrow because no one in NYC has an mmf 2.1 in stock, its also a better TT . Oh well again.
Bundee- I wasn't aware that Rega's ran 1% fast. Mine ran at the correct speed. If a table did run 1% fast, the sound would be pitched ever-so-slightly higher.

Better quality arms will improve soundstage, background quietness, dynamics, distortion, and retrieve more music information.

With a reasonably good table and cartridge set up properly (i.e. stable, level, aligned, tracking force) you should be able to sit back and enjoy with no problem. Without knowing what the rest of your system is or your plan or budget, it would be difficult to suggest tables, but I think that the biggest bang for the buck for most to get started in analog would be in the $400 to $700 (retail)range for the table & arm and around $300 to $500 (retail) for the cartridge . Good combos can be had for around $5-600.

Bundee, it sounds like you've done a fair amount of homework, so the most important thing to do is to get started! Get a good clean record and take it to NYC to try a few tables and decide!!

Regards
Jim