Lovan audio racks....and other racks.....


Hi group,
I'm shopping around for a quality audio rack; Steve Blinn caught my eye and I'm leaning toward one of his cheaper racks....but before I plunk down a few thousand, are there good, less-expensive options? I saw Lovan and would like your thoughts on their products.....; if anyone has thoughts on quality racks that don't cost a fortune, I'm all ears......
Thanks,
Jeff
arcamguy
Timbernation has some great racks that might interest you.
http://www.timbernation.com/
I'm never parting with mine. :-)

All the best,
Nonoise
Lovan racks are not too bad, considering that they are modular and flexible. They are just "out of fad" now. I had used them in my system before, but they are now around the house doing other duties, because I got an unbelievable deal on these Solid Tech racks.

Good: Modular, stackable, cones under each module, cheap on the used market.
Bad: flimsy MDF shelf

If you are to use Lovan racks, here are a few things you should do:
1/ use glue gun and fill the gaps around each of the legs;
2/ fill each leg with sand about 1/2 full to start with;
3/ shop around your local granite kitchen countertop stores for cutout pieces. It pays to shop around, as you will be quoted anywhere from $20 to $200/piece.
4/ go to parts-express.com and purchase sheets of vibration dampening sheets, sandwich it between the granite (top) and the MDF shelf (bottom).
5/ use blutak or any other cheap ones from Walmart between MDF shelf and the metal frame.

And now you have a fairly decent rack.

Frank
The HRS SXR isolation rack is far and above better than any rack I've seen. This isn't a cheap rack but its milled better than anything out there. The company is Harmonic Resolution Systems. I don't own one but know someone who does and it's one serious piece of gear.
My three racks are all standard big box store fluff.
I found them, and paid like $150 each for them.
Filled the square section tubes with dried sand. use butyl rubber bottle stoppers under the feet to dampen the glass shelving. I also 'wedge' which is make the equipment tight between the shelves, having dampening to the underside of the shelf above from the equipment below.
I am happy, and they will last me the rest of my life.
Primarily the good news is I have my racks away from the speakers along the side wall.
So the vibration problem is seriously reduced.

I KNOW this is not answering the op questions, but for others it may be interesting.
Check out pARTicular.com they make excellent racks. semi and fully suspended.