2. cables
  3. 1072162989

taming studio 100's

Just got my studio 100's and am using it with audioquest type +6 cables, which are bi-wired. Connected to an Odyssey Stratos amp. The speaker is a bit brighter in my living room than anticipated. Have a large throw rug and bare floors otherwise. Any suggestions for new speaker cables so that I could tame the brightness? Speakers were dealer demos so they should otherwise be broken in. Also, would appreciate any input as far as subwoofer settings for my paradigm pw-2200. Subwoofer is next to left speaker. Living room is 16X25. Speakers are 7ft apart and listening space is about 14-15ft away. Any input would be appreciated.
phizzer
kr4's avatar
kr4
3,424 posts
 
I would suggest slightly wider spacing and some absorbtion/diffusion treatment at the first reflection point on the side walls.
jayctoy's avatar
jayctoy
1,962 posts
 
Oddyssey are neutral, can be lean,sometimes,AQ Type 6
is not bright,maybe you need the midnight AQ, or
MIT,or cardas cross sp cable.What ic do you use?
rlwainwright
1,901 posts
 
I agree with the other posts - extend the distance between the speakers or sit a couple feet closer. Toe them in 10 deg. or so. If possible, damp the wall behind and to the sides of the speakers with a wall hanging or something similar. Try to do the same for the wall behind the listening position.

As for the subwoof, experiment with the crossover freq., the 100s can go pretty low all by themselves, I'd probably set the crossover at around 35 Hz and give it a good listen. Then, experiment with it set at 30 Hz and see how it sounds...

-RW-
lneilb's avatar
lneilb
107 posts
 
Modify the crossovers. This will make the most substantial improvement, greater than cable tweaks. There is much room for improvement on your crossover boards.
cosmic_void
142 posts
 
I have my sub set somewhere between 50 and 60Hz. The level is actually quite low as I don't care to be evicted at this time. I wouldn't set the sub any higher.

Lneilb,
Have you tried this with the 100's? I'd be interested to hear more about modding the crossovers.
More to discover