No. 26 - MM or MC board?

But I Do !!! (own a RegaRB300)

Twl, send the mod please !!!! (email me to learn more about it).

I performed the chenges in the ML 26 (sensitivity and impedance), That´s More Like It !!!!!!.... just incredible for the price !!

Thanks Twl, you saved me many hours of trial and error with so much different setting combinations (I owe you a fine Mezcal bottle jejeje).

I will nevertheless try to get my hands on that Denon SUT that John recommended .

One final question: When I touch the AI SUT it hums... it does have an earth screw but have not earth the unit yet, is this necceesary? (The RB300 wires does not have an earth cable as you know)

Fernando

John - I got this SUT some years backfrom a friend who bought it in the UK, this was a pretty expensive unitandit is built like a little tank, very heavy and pure silver windings, I just love it´s sound, and was stored for more than 6 years since I had since then active phono preamps that handled MC signal with no problems whatsoever.

In any case, one of the things I like from this hobby is to try different things and listen them in my system.

Enjoy

Fernando

Fernando, I'm glad I was able to help you out.
I'd really love to share that bottle of Mezcal with you!
The best Mezcal I ever had was at a beach near Puerta Vallarta called Las Animus(not sure of the spelling), where the local people were selling home-made Mezcal bottled in old Coke bottles and corked! Truly spectacular, but the border agents took the ones from me that I tried to bring back.

Regarding the HiFi mod, I don't sell them anymore, but you can make one from the instructions that I provided in the original thread on this subject here:http://forum.audiogon.com/cgi-bin/fr.pl?eanlg&1032024188&read&keyw&zzstrange=tonearm=tweak
It is simple and quick to do, and works very well with low compliance cartridges when using them on a Rega tonearm.

Basically, you take a pair of bullet shaped fishing weights which weigh about 12 grams each, and drill a small depth into the big end, so that they fit over the bearing axle nuts. Then you can Blu-Tack them(or other temporary fixing) to the bearing axle nuts, and you are done and ready to play. A hot-link to the photo of a completed installation is in my previous post. Cost is about one dollar.
If you have specific questions, you can email me.

Twl: Thanks for sharing the mod plans with me, I will read the instructions. Send me by mail your shipping address so I can send the Mezcal, you won´t beleive this one, since it is a 12 year old, vintage Mezcal to be served straight as a good Cognac!

Fernando

Dear Tom: I think that what you get on P. Vallarta was a kind of Tequila.

The city of Oaxaca ( México ) is the house of Mezcal, and like you say: truly spectacular, too.

regards and enjoy the music.
Raul.