Is 57db gain enough for Dynavector XX-2?

.25mV is wayyyyy to low for 57db of gain. You won't even hear much at full blast on the volume control.

Your gonna need another phonostage.

Sorry to disagree with the others, but I use a Denon DL103D with a slightly lower .24mV output. I've used a Monolithic PS-1 with 53 db of gain and that worked pretty well. Good enough to not have any real problems with noise or volume.

And, now I use that cartridge with an Acoustech PH-1 with 60 db of gain and it works GREAT.

So, I would say that you should be fine with 57 db of gain. It may not be 100% optimal, but certainly 95%. I'd say you won't have any noticable problems at all.

As with much of this stuff, it's try it to know for sure. But with my experience I'd say you'll be just fine.

Paul Green

Sorry to disagree with the others as well, but the picture that you paint in incomplete. The gain of the phono preamp must be added to the gain of the preamp to determine total gain. With a tube preamp with say 20db of gain, you will have a total of 77 db of gain, and provided that the noise floor in the phono preamp is low enough, this should do with the added gain of the amp. If your preamp is of low gain, or if your phono preamp has a high noise floor, then you are skating on the edge.

Wow, I'm glad I asked. I am using a Monolithic passive/active linestage driving my Audio Research D250mkII into Proac 3.8's.
The ARC is input sens. of .8v and is increadibly easy to drive. I cannot put my phono direct into ARC without it being too loud. There are two variable resistors on the back of the amp which allow me to "turn up or down" the input signal. With these wide open I currently have more than enough gain. A loss of 3db however could be substantial.
Just curious, Creativepart, did you listen to the new Monolithic phono before going to the Acoustech?

You guys can argue about about how much gain one needs or whether Alun needs another fono stage all you want. I stand by my statement--what really matters is how much noise the system has now, and whether Alun can still love the sound of his system with 2.4dB more noise. Only Alun can answer that question and probably only by using that Dynavector in his system for a while.
.