What does this mean? If you use the analog out, you are hearing the dacs from the processor, if using digial, you are hearing the dacs from the source? And if a processor has analog pass throughs, this means I am hearing n dacs at all, just directly of the CD direct?
I like to use the digital out if the receiver or processor does analog to digital conversion then digital to analog conversion before sending to the pre-out/amplifiers. If the receiver/processor has analog direct or bypass then I like to use the dac built into the cd player (if it is better quality)and connect it to the receiver via the analog output/input (because I like the MIT sound). I also too use MIT, T2 analog out and T3 Digital to jitterbox then T3 digital out to receiver. Digital In my case Denon DCM560 to Denon 2801. Analog Sony SACD player to Sony TAE-1000ESD pre-amp. The analog method allows me to hear more of the MIT "sound" than the digital, although the T3 digital are much better than the TMAXdigital I had before it. THe digital method does seem to give a lower noise floor in my set-up.
Hi Dan...I think you have it backwards. If you use the analog outs of the CD you are using the D/A converter in the CD, not the preamp. If you use the digital outs, your CD player is nothing more than a transport and your preamp's DACs do the conversion. I'm not sure what analog passthrough means, but I assume you are right...the converted analog signal from your source will pass through as an analog signal and not be converted to digital. I don't know why it would be converted to digital...for HT effects, maybe??
heimert, try it both ways and use what you prefer. I'm not that familiar with your B&K, but some similar devices have DSP manipulation that is only availible with a digital signal. Whether or not this manipulation is good or not is controversial. Porschecab, if you use the analog out you are hearing the DAC built into the CD player. If you use the digital out you hear the DAC in the processor (when properly set up). If you use the analog pass through of the processor you hear the what ever analog signal that was presented to the processor with out (or more likely very little) effect of the processor.
You must have a verified phone number and physical address in order to post in the Audiogon Forums. Please return to Audiogon.com and complete this step. If you have any questions please contact Support.
