Yes, I've seen that one and it does look interesting. I am trying the regular Voigt Pipes first, because my ceiling is vaulted, and the Terry Cain upfiring pipes may not get much bass boundary reinforcement from my ceiling. The Cain pipes would gave to give at least 3db more bass in order to compensate for the loss of boundary reinforcement. Also, when I experimented with transmission line lengths in my last set of single driver speakers, I found that at some point, longer line and lower tuning can result in loss of output level. Since the Voigt pipes act as a T-Line and a kind of horn, this may be mitigated somewhat, but the mouth size is way to small for a real horn and would reflect alot back up the throat if pressed into being a real horn, drastically raising the cutoff frequency. Also, they act as a bass-reflex somewhat, and the box volume would be doubled, requiring much tuning of the port mouth. Cain designed his pipes for a smaller Fostex driver that has a significantly higher resonant frequency, and likely lacks the bass output of the Lowther. The Lowther, having a resonant frequency of 36Hz should be good down to 40Hz-50Hz in the traditional Voigt pipe cabinet. This is fine with me. I'd like to go lower, but I can live with 40Hz. If I decide I really need the extra bass, I will build the "Big Fun" horn with a cutoff of 32Hz on the low end. Efficiency of the DX3 in all these back horn cabinets is about 100db with 1 watt input. The only way to go higher is to go with a front horn, which I don't like to do because of colorations imparted to the mids.
New Lowther Drivers.
I have ordered a pair of the new, improved Lowther DX3. The improvements consist of changing the suspension from a rolled-out type to a rolled-in type, putting a rolled edge on the whizzer cone to stiffen the edge and eliminate the midrange peak called "Lowther shout". They also offer a new phase plug that looks like a "light bulb with holes" that is controversial. Bullet style phase plug is still standard. They are sending me both types for evaluation.
I am currently building a set of Voigt Pipes enclosures, which I hope to get done before the drivers arrive. I am following the plans from the Lowther Club of Norway website.
I'm very excited about this, because I could use some extra efficiency in my speakers. If anyone has built these Lowther Voigt Pipes before and can offer some advice, it would be appreciated. It is not really hard, but sometimes a simple tip can make the difference. BTW, Doug(Grandpad), you really helped me to make up my mind on buying these drivers in the last thread I put up on this topic. As always, I will give reports on results, just in case anyone is interested. Comments?
I am currently building a set of Voigt Pipes enclosures, which I hope to get done before the drivers arrive. I am following the plans from the Lowther Club of Norway website.
I'm very excited about this, because I could use some extra efficiency in my speakers. If anyone has built these Lowther Voigt Pipes before and can offer some advice, it would be appreciated. It is not really hard, but sometimes a simple tip can make the difference. BTW, Doug(Grandpad), you really helped me to make up my mind on buying these drivers in the last thread I put up on this topic. As always, I will give reports on results, just in case anyone is interested. Comments?
- ...
- 24 posts total
- 24 posts total

