Will a quality USB cable make a difference....



Will a higher quality USB cable make a difference when being used between a storage device (bus-powered mobile drive) and a music server (w/o DAC), as opposed to those used between a source (iMac) and USB converter/DAC? Can anyone confirm an audible improvement?
sakahara
"Hello Steve: Do you mean USB 1.1 versus USB 2.0 or something different."

Certainly async USB protocol using USB 2.0 is better than adaptive mode, but this is not what I'm referring to.

I'm talking about circuit design, implementation and oscillator choice. These are all critical to achieving good performance. Somehow people are under the impression that all Async USB interfaces are alike, just get the cheapest one. This could not be further from the truth. Even after you have a solid circuit design on a schematic, the IC's you use and PC board design are actually critical, as well as the oscillators and power supplies. You can buy $1 oscillators or $200 OCXO oscillators. You can have a 3-terminal regulator or a fast discrete regulator. You generally get what you pay for. Dont expect to pay $100 and get vinyl quality sound. When it comes to digital, this design is even more critical than the DAC itself.

Steve N.
Empirical Audio
"Certainly async USB protocol using USB 2.0 is better than adaptive mode "

Certianly it is widely accepted now - however, the emphasis is only in receiver i.e. USB port of USB DAC or USB/SPDIF adaptor.

Assuming that you have already USB DAC with async USB prototcal - do you need special (async?) protocol for the sender i.e. your USB 2.0 computer port ???

" Even after you have a solid circuit design on a schematic, the IC's you use and PC board design are actually critical, as well as the oscillators and power supplies."

Again, you refer above to the DAC (or USB Adaptor) or to the computer(server) ???

I cannnot build either one but at least I want to know what is required. Today's fashion is to match cheap computer with expensive and very good USB DACs and I wonder how your comments are related to this fashion.

Empirical Audio, for example, does not manufacter servers at all - only digital audio componenents.....I am trying just to learn...

Thank you in advance
"Assuming that you have already USB DAC with async USB protocol - do you need special (async?) protocol for the sender i.e. your USB 2.0 computer port ?"

The computer device driver takes care of this, either native or custom device driver, and the USB port controller hardware in the computer.

"Again, you refer above to the DAC (or USB Adaptor) or to the computer(server) ?"

What I'm talking about is the DAC or converter USB interface design, not the computer.

"Today's fashion is to match cheap computer with expensive and very good USB DACs and I wonder how your comments are related to this fashion."

The cost of the computer is not usually significant. The only requirements are USB 2.0 compliant port and a reasonably fast I/O structure inside. Either of these can be compromised at any price. The latter has been poor on certain PC laptops, including Dells. Mac Mini has very good I/O using USB.

The more critical thing is how the USB interface was designed on your DAC or USB converter. With the advent of async USB interface, the role of the computer is much less significant.

Steve N.
Empirical Audio
The Diamond usb cable is so much better ,it is across the board better than the carbon usb cable. The top end air, the transparently and better defined bass are easily distinguished differences. Don’t let anybody kid you there is no difference among usb cables. The difference to me is just like all the rest of the cables. They all sound different.
Sorry, but it's just not possible. Keeping it simple, USB is a digital data transport bus, not an analog port. All it moves in the data path is 0s and 1s. If a different USB cable results in a change anywhere downstream then you have a major problem somewhere in your system. I know that you think that you are hearing what you say that you think you are hearing, but all of my 30+ years experience in the physical sciences, data collection and computer systems design leads me to believe otherwise.
Br3098... please, please, please speak from audio experience. i.e. actually using different USB cables on a quality DAC with a quality computer such as the MacMini.

Give it a try... actually build some real listening experience with this equipment and cabling... and then come back to us with your listening experience on your own system, with your own DAC, your own computer, and your own music... not your book learning and theory derived thereof.

I respect learning from the academy. I am a product of it and an active member of it myself. But it has its limits, and this is one.

If I sound annoyed, I am.

I am frankly so tired of "authorities" who have not taken the time to gain their own audio experience misleading newbies with the "truthiness" of their book learning and university degrees on chat forums such as this one and in other places.

You wrote:

>>all of my 30+ years experience in the physical sciences, data collection and computer systems design leads me to believe otherwise.<<

Listening experience matters. This is not an article of belief or faith as in your statement >>leads me to believe otherwise<<.

:) listening,

Ed