Tube Pre for Klipschorn


What tube preamp match well with Klipschorns; or should I be going the other way and use a SS pre and tube power amp(s)? If so, what tube power amp is a good match with the khorns (Quicksilver horn amps?). I trying to get rid of as much noise as possible. I'm currently using a Quicksilver fullfunction tube preamp, but it a little too noisy and I'm using a Citation XX SS poweramp.

Thanks
tbone
Marco,

I didn't get a name at Quicksilver when I called, but the person told me that the Quicksilver Fullfunction pre was not a good match with the K-horns because of the noise factor. I ask if this was just his preamp or would it be different with others like CJ and AR. He stated the noise would be there, but it could be more or less with other brands. He also stated that noise would be an issue with normal PP tube amps as well, but a combination of their horn with the Fullfunction pre (or others) would probably work due to the fact the the horn amp has less gain. The gain on my pre is 39db @ 1Kz, so I'm thinking a different pre might help a bit. When I was using the pre with Electrostacs, it was great, because they are very inefficient, so the gain really helped. Also, I have tried different tubes with the same results. I using a RCA 12FQ7, Telefunk 12AX7, and Mullard 12AU7.

Sean,

Thanks for the info, I'll check out the web site; I'm always interested in hearing others opinions.

Calvin
Wow, that's a surprising input on the compatibility issue. I'll have to check in with my friend as he's never mentioned that issue to me and I know he has Khorns (as well as Belles and LaScalas). Glad you were able to get some input from the good folks there. The gain on your pre is significantly higher than mine (mine is 18db unbalanced, and 24db balanced on my work system going into the Mini-Mites pushing Heresy's which are only 94db efficient). I'm not sure what the gain is at home with my Cary SLP-50A. The only noise issue I have is with my Sonic Frontiers SFP-1 phono stage which has a 37db output in the MM stage which I'm using. With that I have identical tube noise issues to what you describe with all kinds of tube combinations. This is going through the Mini-Mites which have the 18db higher gain then the Horn-Mono's (in my work system). I'll let you know if I hear back from my friend to see if he has similar issues. Thanks for posting your findings as it is useful information to me with my Sonic Frontiers issue!

Marco
Has anyone out there tried pure class A Solid State gear with their Khorns? I have heard that pure class A S/S can sound like "tubes without tears", ie maintenance, etc. Any opinions on this?
I've used various Mosfet based amps on several different pairs of Klipsch products with different levels of performance. With a modified B&K, the system was actually pretty dark sounding ( believe it or not ). With a Perreaux, the sound was both powerful and more tonally balanced but lacked open-ness and top end "sparkle". Using them with a Class A Forte' 1A, the sound was lean but not hard sounding. With a Classe' 70, the sound was VERY lean, bright and grating sounding. Other than that, i would think that the Pass Aleph series, Ayre and a handful of other SS amps might be good candidates for K-horns or other Klipsch "classics". Sean
>
Marco,

Correction of the gain issue. My line stage is 27db and the phone is 39db.