Walking that fine line: What would you do ?


I recently installed an amp on loan from a friend in one of my systems. We swapped amps just to "compare notes". I had an amp that he wanted to hear and vice-versa. The fact that we are a couple of States apart makes it hard to do first hand comparisons with each other, so we have to be selective, especially with amps. Between the shipping costs and the potential damage, this is the first time that we've done this. If we were both happy with the results, we were simply going to swap amps and compensate the differences in cash.

As it turns out, i like the amp quite a bit. It seems to be a good match for the preamp and speakers that i'm using it with. There is only one "problem". Whereas the system has always sounded very musical with good accuracy ( hard to achieve ), i've now moved up a notch on the "accuracy" scale. I'm now hearing a little deeper into the discs. While most would call this a step in the right direction in terms of being "revealing", i'm beginning to think that it is "annoying" and "distracting". Don't get me wrong, the amp / system sound quite good, maybe the best it ever has. It is not "etched" or "analytical" by any means. I could use all of the superlative's to describe what i'm hearing, but i've now got one nagging problem.

I can now hear just how much the engineers are "twistin' knobs" on several recordings that previously sounded "warm and sweet" i.e. very enjoyable with no distractions. One in particular is Diana Krall's Love Scenes. On some songs, you can easily hear the faders come up as she begins to sing and drop down as she stops. This is evident as the noise floor increases and you hear more hiss. When the mics are open, you have less of a "black background" between musical notes from the instruments. On some of the other songs, they simply leave the mic open most of the time and you hear hiss throughout most of it. On a few others, the leave the mic open, then fade it in a few spots, open it back up, etc... Some of this was obvious before, but not anywhere near the extent that it is now.

While most of us would not consider this a big deal, it kind of gets annoying after a while. To me, it's kind of like looking for a smaller hidden picture within a much larger picture. Once you find it, it is all that you can concentrate on. How you could've missed it for all that time is beyond you. So it is with this system now. In other words, these "small details" now distract me from the "big performance" taking place.

Has anybody else run into a similar situation and what did you do ? I'm open to suggestions as i'm kind of twisting and turning on this one. I like the amp a lot, BUT.... Sean
>
sean
The goal of hi-end audio is to recreate live music at home. Can you hear all these craps in real life? I don't think so. The word "reference" is misuse. There is only one reference, it is the original live music.
The "reference" that you refer is what I describe as an "autopsy".
It is nice to look at a pretty woman at a distance, but when you go closer and do an autopsy on her. Very ugly and horrible!
The amp that i lent out ( Sunfire rated at 300 @ 8 / 600 @ 4 ) was not what i ultimately favored in this system. That honor goes to any of the Forte' 3's or Forte' 6's that i own ( i have 2 of each ). All of the Forte's are relatively rich Class A/B amps and run quite hot. These two models, one earlier (3) and one later (6) are rated at 200 @ 8 / 350 @ 4 wpc. Since the speakers are appr 2 ohms at low frequencies and never go above 4 ohms, i need all of the "oomph" i can get. The trouble is doing that while retaining good sonics and keeping the price reasonable.

I have used the "baby" Sunfire in this system with good results though. While it did quite well overall, it is not as "sweet" or "airy" as the Forte's. It was pretty similar to the amp i have on loan, which happens to be a slightly modified Robertson 6010 ( 200 @ 8 / 400 @ 4 ). Looking at the internals of the Robertson, there are definitely things that i can do to improve its' performance right off the bat. I'm not doing anything to it though until i figure out if i want it for sure or not.

As it stands right now, the Robertson is somewhat of a blend in performance between the Sunfire and Forte' amps. The Robertson is a little more solid sounding than the Sunfire while having a glimpse of "sweetness" and "air" that the Forte's offer. Both the Sunfire and Robertson are better performers in terms of raw "oomph" and bass impact / definition as compared to the Forte' amps. Since i like the Forte' and Sunfire for various reasons, you could see why i would have a good amount of enthusiasm towards finding a reasonable blend of the two in the Robertson.

I had been running a set of Kinergetics KBA-202A Platinum Monoblocks ( 250 @ 8 / 500 @ 4 / 800 @ 2) into these speakers, but i've got them torn apart in terms of doing some very time consuming modifications to them. While they were pretty decent performers before, i hope that they will really shine when i'm done with them. I see no reason that they won't, as i've simply shortened the signal path, re-routed / seperated audio & power supply wires, improved the ground plane of the circiut board, added bypass caps to the power supply filters, etc... Since they already had Cardas wiring throughout the entire audio path, i did not change that.

With all of that in mind, any amp that i use in this system will HOPEFULLY be temporary until the mono-blocks are done. Then again, if i can get one of these amps dialed into this system well enough... : ) Sean
>
It sounds like you took a step towards analytical because that's what you describe yourself doing. I got back to musical by changing speakers (smoother) and preamp (purer). Enjoy the ride!
Well Thanks to all the big hitters in this thread I have now gone back and listened a bit more closely to the Alison Kraus CD in question as well as some other music.....Now all I hear is the music fading in and out! I can't hear the music anymore. It's "well there it goes again, so that is what Sean was talking about" Or there's sugarbrie's echo"
I have to learn to stay away from threads like this so I could remain blissfully ignorant of everything except the music. The only problem is I think it is too late!
PS excellent thread nonetheless
I would submit that almost any system that is relatively revealing will present you with the same. I have several Krall CD's and I find them to be mastered the same way. I am not a recording engineer, so I will use the term "Faders" that you used earlier. I can easily hear the noise floor (in the form of hiss) go up and down on many different CD's when someone starts or stops singing. I think your gear is probably fine, simply more revealing of the content on the disc. I personally would not go backwards, to remedy this, I would purchase (albeit expensive) audiophile level discs (i.e. Groove Note Gold) where the same material is available. I have Jacintha Autumn Leaves Gold and I have found to a lesser extent the same issue. I will say that since I gave up my SACD player in lieu of my DIO, I have found that Hybrid (Redbook/SACD) sound better than there Redbook only counterparts. I am sure it is because the original master was encoded using DSD and then converted to 16/44.1. This seems to sound better than strait redbook. Anyway, just some additional thought on the subject matter.
Regards,

Mike