HELP - buzzing on Magnepan 3.6R; repair or not?


I was trying to sell my Magnepan 3.6R's which I purchased used from work (along with a pair of ML Odyssey's which I decided to keep. I was demoing them to a prospective buyer last night. I was playing deejay and threw on about 7 or 8 different tracks - chamber music, jazz, orchestral, pop vocal, etc.

I find them bright in my system so I wanted to make sure the prospective buyer understood that so I played a track that demonstrated that explained that to them. I said I didn't know how they rocked though so offered to put something on. I grabbed a White Stripes CD which has some extended bass notes on it. One of the panels started to vibrate/buzz. ARGH! Of course, I didn't know that when I bought them, but I received a decent enough deal from work that I can't complain.

So, I have two avenues I can pursue to sell them - one, sell as is at a steep discount (the prospective buyer is actually still interested in this as an option since he has no other components for his system yet so can wait) or two, repair them myself which would then allow me to market them as having a new panel and at that point I'd also now have boxes to go along with them. Which avenue of sale makes the most sense?

I left a voicemail at Martin Logan service early this morning (8:30AM their time), but did not receive a call back. Does anyone have any idea what it costs to repair this? I'm assuming this is not something that can be field repaired by me.
donato
when I typed Martin Logan, I meant Magnepan (also have a pair of Martin Logan Odysseys).

For an amp, I am currently using an OCM 500 (225W+ at 8ohm and near double at 4ohm) so I do not believe the amp is clipping.

I get the buzzing on one speaker but not on the other. I used the Stereophile test CD with the test tones to confirm that the buzzing/vibration was indeed specific to that panel on the one speaker. I get it ising track 27, the 50hz warble from the CD. The other speaker produces this cleanly. It's definitely a buzz/vibration. It's coming from right at or just above the bottom cross bar on the speaker.
Your speaker needs repair. You'll probably find that a wire has separated from the panel (glue melted or failed) and that is what is causing the buzzing sound. If you or your prospective buyer are handy, the repair CAN be DIY. Magnepan sells the glue and the instructions to do it.

Otherwise you can ship it to them and they'll fix it. Turnaround time seems to be about 6-8 weeks.
With Magnepan speakers, the higher quality your electronics have, the better. There are powerful amplifiers that will not control the Magnepans with as much precision as others. Also, try putting "tip-toes" under the speakers. Place (2) point down at both ends of one leg, and (1) point down under the middle of the other leg. I am not familiar with "OCM" electronics. What are the other components in your system? Are the source, pre-amp, cables and AC power screen of similar sophistication? You may in fact need a repair, but they should be quite sellable if you decide not to keep them.
I have owned five pair of mags. I sold two sets to a local guy that will take apart anything. The mag 3's an older pair had a slap with a buzz he took the covering off the speaker and pressed his finger down on a staple and solved the problem, it was a lose staple.
It is a personal choice, I have also set two sets to the factory and had them repaired and, or refurbished, either way the factory has reasonable pricing.
I had the same problem on my old IIa's. I had spilt a coke on the panel, and I believe the mylar coverning the magnets delaminated.