calling all vandy 5a owners

Yes, the 200 hour mark was about where my speakers started comming around. Then I tuned the bass and found most of the gains were actually in the mids. I think your dealer will be able extract the most out of these speakers. When they get fully broken in, I think you will be VERY happy

Jkphoto is right on - you MUST find the proper positioning for your speakers, THEN have the subwoofers tuned to the room by your dealer. Take the spikes off, unplug the subwoofers, then use the "thirds" measurements in the manual to do rough positioning. Move the speakers around and play music you are familiar with until you find the spot in your room where the "magic" occurs. Do not be afraid to move them way out into the room. Do not be afraid to try rotating your room - if the speakers are on the short wall, put them on the long wall, or vice versa.

Eventually you'll find the spot where the speakers sound the best. You'll know it immediately when you hear it. Put the spikes back on, put them in position (mark or write down the positions for future reference) and plug the subs back in. Then have your dealer tune the subwoofers to the room.

It may sound like a lot of work, but it's WORTH IT.

The adjustable subs are nice but in my opinion, the real magic of the 5 is in its mid-range. Do you like how they sound with the subs turned off? If not, either there is something wrong with the placement or they are not good match with your amp or the speaker cable. What cable do you use?

Also, you need more than 200 hours to run the subs in. My 5s, not 5As, took over 6 months, probably close to 6-7 hundred hours.

Don't panic.
Your dealer made the 5's sound the way you liked,or you wouldn't have bought them. Let him have a chance to do the same at your home.
I am a little surprised that he didn't come over and set them up from the beginning. But then I know nothing of any of the circumstances.
Don't worry, that is one damn good speaker, which should make you proud.
Do something that no audiophile has ever done before. Be patient.
Best,

I agree wholeheartedly with Rex. Room position is so important. In my case the final 5A position was significantly different from the previous position of my 2CIs. I used shallow baking pans lined with MDF to facilitate sliding the speakers around for discovering the best positioning. It is largely a trial and error process, and well worth the time. There is a magic location where the sound stage really works, and then you can adjust the subs accordingly. Be patient and let the speakers fully break in first. Mine took at least 250 hours and then there was a snap... hard to explain but it happens.