Finish Quality of Von Schweikert VR4jr's

You can sand and recoat but you will not get as smooth a finish as factory sprayed on.Also veneers are natural wood ea has its own look you can kind of match but it will never be perfect because its wood not plastic.Many folks are so used to vinyl fin they think wood should look the same it doesnt .Natural fin on wood is best as it ages it looks better and better plastic coats just suck I will never purchase a loudspeaker new so finished.

Trueanalog, Please reread my posts!..I love the sound of the speakers, but am annoyed that the finish is so sensitive to scratches. Period.

Dude - Vandersteens aint made in China! Made right here in Cali.

Brrgrr,

If the scratches don't go into the stain, yes they can be removed. Sand lightly with some 320 grit sandpaper. Be real carefull not to sand through the lacquer. Remove the dust with a tack cloth and recoat with lacquer. Spray lacquer can be purchased in a can at Lowes. The problem is going to be blending. It's going to be easier to just recoat that entire side. Remember, you have to spray in a dust free environment.

If the scratches are minor you might be able to get away with just applying a light coat of wax. I use BriWax. Put on a very light coat and let it dry for 24 hours. Then, buff off with a clean cotton cloth. I use cotton diapers (new). Be very careful not to put swirl marks into the finish. Briwax actually softens the finish a little that's why you have to let it dry for 24 hours. It actually smells like kerosene when you open the can. The BriWax can also be applied with 0000 (four 0) steel wool, but unless you are familiar with that technigue i'd leave it to somebody with experience. The problem is the finish is so thin that you might damage the wood under it.

Another idea is to have a professional repair the scratches. Look under furniture restoration in the phone book. Some of these guys are so good that they can just about make scratches disappear even if they are in the wood.

Trueanalog,

According to the windows sticker at my local Audi dealer, the A6 is made in Germany. According the MB the CK and CLK are manufacturered in Germany. They also told me that they do not manufacture any cars in China.

I emailed Dali and they assured me that their cabinets are made in Denmark.

I really think that you need to reread the thread. Nobody is fualting the sound or design of the VR4jr's. I'm sure that that China is capable of doing and excellent finish.

later,

Thanks for the great advice. I'll try to get someone with experience repairing furniture locally to have look.
Your reply was greatly appreciated.
Carl