Power Supply Options - Pre Amp and Power Amp


Hi, I'm looking to upgrade the power supply for my hi-fi setup and wonder where I should start - quality power outlets, power distributor or power conditioner?

I'm considering a 3 to 4 outlets power strip so that I can plug all the power cord into it (instead of using a low grade, household one). My idea is to ground the cords from CD player, pre-amp and power into the same outlets to avoid "hum" noise.

FYI, my front end is Audio Research CD7 tube CD player, my pre-amp is Ayre K-1xe (comes with separate power supply) and Pass Labs XA30.5.

What's the simplest and lowest-cost solution? Can you recommend some high-quality power outlets (4 to 6 outlets would be great).

Thanks.
r0817
I use a product called: Furutech E-TP60/20. It's a 6 outlet case with 12 ga wiring and 20 amp receptacles, even comes with one of their nice power cords. (Google for more details). They make similar units less in price that may work for you also.

I plug my Pass XA.5 amps into the wall, my preamp and tuners (have several) into the Furutech.

For digital, you could use one of the Furutech outlets and hook up something with a "digital filter" but I'd try it without and see what happens.
Best results are to make your own 'powerstrip'.
Get a plastic home cu=onstruction outlet box from Menards or Home Depot.
A variety of types are available.
I like the heavy grey plastic ones..
Get a pair of Pass & Seymour heavy duty outlets and some wire, a plug.

I would advise adding a wire bypass to add to the strap across each half of each duplex.
And better to plug the amp in the first one. The one the wire into the box attaches to.
Make a small label or use a marker to mark the box with which one is the #1 outlet for future reference.
This type of device also allows for changing duplex to some of the aftermarket audiophile types in the future.

I have several such boxes

The only 'flaw' is the AC wire going into the box is not clamped to the box. (the wire is only screwed to the duplex outlet) So an accidental hard tug on the box vs cord should be avoided. This can be alleviated with some sort of scheme (like epoxy or Uethane caulk.. some sort of glue at point of entry). But it does not worry me.
Thanks for your feedbacks and suggestions. I can start by upgrading the outlets (receptacles?) but I'm not sure if I will able to allocate a dedicated line.

What's a dedicated line anyway? My house was newly built a few year ago so the power lines are relatively new. I think they're 15A lines. BTW, my hi-fi system is in the living room. There're two wall outlets that I use for both my hi-fi systems and TV, cable, telephone, etc. Not sure the two wall outlets share the same line. Or, they are on the same line with other outlets throughout the living room.

Any suggestions how I can re-wire or allocate a dedicated line from the fuse panel? I'm not that handy with wiring. Shall I need to hire an electrician to re-wire for a dedicated line?
I needed the help of electricians but I am no DIY type. A dedicated line is an electrical circuit that is used by your audio equipment only. The Idea is to ensure that no other outlets or appliances share that line.
If you want to upgrade it to 20 amps it would be wise to do it while installing your dedicated lines.
I checked the markings in the electric panel. My living room has a dedicated 15A line for outlets and a separate 15A line for lights.

I guess I can unplug all other electronics (except modem) from the living room outlets to make it a temporary dedicated line when I play my hi-fi.

Are there any benefits of upgrading an outlet with a high-quality receptacle in the living room? Can you recommend some high-quality receptacles? I know Furutech has some offerings but I don't know about their price or where to get them. Thanks.