My integrated amp does not have a subwoofer out, so my manual says I should connect my CD player outs to the line-level inputs of the sub; then, connect the high pass outputs of the sub to the inputs of the integrated amp.This makes no sense unless your CD player has a preamp that you are using to control the volume. Does your integrated amp have a preamp output? It would be helpful to list the integrated amp and CD player.
Subwoofer Connections
I have a Sunfire HRS-8 sub. My integrated amp does not have a subwoofer out, so my manual says I should connect my CD player outs to the line-level inputs of the sub; then, connect the high pass outputs of the sub to the inputs of the integrated amp.
My question is whether I should use subwoofer cables or normal interconnects for both connections. The subwoofer cables say they are for low frequency; but would using these mean I would be getting lower quality at the higher frequencies?
My question is whether I should use subwoofer cables or normal interconnects for both connections. The subwoofer cables say they are for low frequency; but would using these mean I would be getting lower quality at the higher frequencies?
- ...
- 5 posts total
- 5 posts total