@Kalbi23...BDP-105 settings insists on either hdmi or analog, you cannot have HDMI ticked in settings or your music will have an echo affect. You have to untick HDMI in settings when going from video to two channel audio. Oppo HDMI to the tv input, tv output for sound should be a toslink cable to avoid the ground loop. I run my toslink directly from the cable box instead of the tv. I will not use coax/rca from any video source to another source much less to the preamp because of the ground loop. With that said, I also keep the cable box and tv on a different circuit than my audio.
Buzz/hum through speakers
When I turn on my system, I get a buzz/hum through all the speakers. I have everything hooked through my Furman line conditioner. I have plugged my amp directly throught the wall outlet with only speakers attached to the amp and no noise. I have disconnected everything from the line conditioner one by one and only makes the noise when the pre and amp are turned on together. My dealer gave me something called Hum X and when I plugged the Furman into the Hum X, noise still there, it's only when I plug the Hum X to the back of the Furman and plug the amp into the Hum X, the noise is gone. Is there any way to get rid of the noise without using Hum X? If I can't get rid of the noise with Hum X, is Hum X holding back the full potential of the amp?
- ...
- 12 posts total
- 12 posts total