Cables more hype than value?


What are the opinions out there?
tobb
Irv, to say I believe in differences is not an insult but for you to hear it is?.
That's rich.

Oh come now, Nonoise, I'm not talking about the discussion of possible differences being bandied about, I was referring to the insults and negativity, which you true believers seem to want to reserve for yourselves. Let's see, I've been called immature, that I lack experience, that I lack listening ability, that I'm closed-minded, and that's just you. And, of course, I'm an ass, according to my new friend Bandy. (Well, that might be true.)

And what is the net of your argument, that you and other believers say so? And that some of them design amplifiers and speakers? This is evidence? All this is evidence of is mass delusion, or perhaps just some people saying what sells in some cases. Anyone that builds amps using hook-up wire you buy by the spool knows that the signal on that cheap-o wire, the wire that's just stranded copper with some teflon wrapped around it, is carrying the same signal as that special geometry, proprietary mix of various vintages of copper and silver, with four layers of some special insulation, and perhaps a battery-powered dielectric. Believe me they know. So do the speaker guys. They're building crossovers, and they know too. Oh yeah, they're choosing all of this so carefully. Especially the tube amp guys with their steel-pinned tubes and sockets that have mechanical play in them.

Why is it that the cable fallacy soldiers on when there is not one valid theory about why such differences exist, or even one test case that shows anyone was able to tell the difference between cables, no less which one is actually better, any more than one would expect by random chance? Yet we have people who claim that not only are there differences, but that they can design cables to sound a certain way. Which is more likely, that cable vendors know some secrets no one else does, or that they just make stuff up that markets well, like funny geometries or some special mix of conductor materials, and says whatever it takes to make the sale?
The following was written before seeing Irv’s most recent post, the last paragraph of which touches on aspects of this controversy that are somewhat similar:

In the midst of all the disagreement, I think that there is one thing pretty much everyone would agree on. If in fact there are audibly significant differences among cables, those differences are not fully explainable on the basis of generally recognized science.

On the one hand, the effects that resistance, inductance, and capacitance will have under some circumstances are readily explainable, and can be analyzed quantitatively. The role that cables may play in ground loop effects, emi/rfi pickup, and (at least in the case of digital cables) impedance mismatch effects, are readily explainable, although not readily predictable or quantifiable.

On the other hand, various explanations of the claimed benefits of high priced cables, involving things like strand jumping, metal purity, dielectric absorption, skin effect, time alignment, etc., while perhaps providing the basis for effective marketing literature, are either speculative or do not have established thresholds that quantitatively define the point separating what may be sonically significant from what is insignificant.

All of which raises an interesting question, that seems to be rarely if ever discussed. If cable differences are not fully explainable on the basis of generally recognized science, upon what principles and upon what basis do the cable designers design the cables?

The likely answer, as I see it: Upon some combination of trial and error, using a relatively limited number of systems; pet theories, whose applicability across a wide variety of systems is unproven; and, perhaps most significantly in the case of expensive cables, by overkilling every parameter that the cable designer considers to possibly be relevant. With the degree of overkill increasing as the price of the cable increases.

In earlier posts in this thread I addressed how system dependency, especially the dependency of many cable effects on technical characteristics of the components that are being connected, can be expected to loosen the correlation between cable performance and cable price. Each of the three approaches to cable design and development that are listed in the preceding paragraph can be expected to further loosen that correlation.

Regards,
-- Al
Al, I always enjoy your posts. You're a classy guy. I understand your position, that classical theory tells you shouldn't hear cable differences, but in a system context you feel you still do. I can take leaps of faith for audibility with active components, but cables? At least with active components there are measured differences, and it's a matter of argument over what's audible. Even then most of us fail the blinded tests. Amplifiers, especially, can be load-sensitive, but cables aren't, and there's just nowhere to stand. How do you reconcile that? Or do you just give in to your whatever your mind desires? ;-) (A position, incidentally, that I understand completely, as long as one is honest about what's happening.)
Al,
Thanks again, for chiming in. Your insight is always welcome, comprehensive, and calming. Would it be that we all had that same discipline.

Irv,
I've disagreed with you but never mentioned your maturity or experience. I simply doubt you or your systems aural acuity as there are cables laying about my place that all sound different that anyone who has been to my place can attest to and none of them are badly or improperly made and that work in any system. None of them were that expensive nor would I condone dropping mucho coin on cables unless one could afford to. I know I can't.

Simple as that, all mass delusion theories aside.

I, and others, do hear a difference. As I've said earlier here and elsewhere, I've come across people who do hear the difference but simply don't think it makes that big a difference and it's only been through debating it that they finally admit it.

I believe it due to the nature of this hobby and the ridiculous prices some pay thinking it will make a dramatic difference in their lives. (this is not to impugn Audiolabrynth who's took a different and interesting route in assembling his system).

This enmity seems to be a in the form of a redress of sorts taken up with a well intentioned but misguided belief that one can set things straight if only they scold others enough.

It's only a discussion.

All the best,
Nonoise
Just when one of these threads dies down another rears its ugly head. Agreement will never be reached between the two opposing schools of thought here. Why don't we all just agree to disagree and go on to better/other things?
These discussions never end well and eventually descend into vitriol, name calling and worse.