2. amps-preamps
  3. 1132596952

Any ideas why my amp buzz's......

Any ideas why my amp buzz's when I hook my tv up to my Integrated amplifier? I use two different pair of speakers: Triangle Zerius and Quad 12L Pro Actives. It only buzzes when the Quads are hooked up not with the Triangles. The Quads have 40/60 watt amplifiers built in and they are hooked via pre out on my integrated using analysis-plus interconnects right into the back of the Quads. Any comments or suggestions would be a big help till I buy a pre amp for the Quads.

Thanks,
Tom
128x128trianglezerius
swampwalker's avatar
Ag insider logo xs@2x
swampwalker
5,132 posts
 
Ground loops via CATV co-ax are very common. For a cheap fix, get a ground isolation transformer for the co-ax line from Rat Shack. For a more expensive fix, a Mondial MAGIC. Fix # costs less than $10, fix #2 costs about $100.
programmergeek
322 posts
 
Ground issue. Try lifting the ground on the quads or tv.
seasoned's avatar
seasoned
167 posts
 
Programmergeek has the first solution you should try. By "lifting" you should put a cheater plug on the amp and see if it fixes the problem. If not, try the cheater plug elsewhere in the system, i.e., the Quads, TV, etc. I would try it first on the amp, though...let us know how you make out.

John
orfe
14 posts
 
there is a good chance the amp in your quads has something wrong with it. see if the quads buzz when they are hooked up on there own. listen carefully on their own they might not buzz as much because the t.v. hook-up exentuates the buzz. good luck.
porziob
316 posts
 
If the buzz persists in the Quads only when the TV is hooked up to the system, you need an isolation transformer. Mondial Magic gets my vote `cause it eliminated my hum.
More to discover