Absolutely. It blew all the output transistors of one of my monoblocks.
Static electricty - Can it damage audio gear
I have run into a problem with static electricity and my AVP2 processor. It took a while to figure out but if I rub my foot on the carpet several times and touch the processor it will suddenly change into another mode or freeze into a setup mode. There is no shock or spark but the unit still freezes. Can this cause permanent damage to any of the circuitry ?
This is the 1 st time in 6 years that it has happened. Can a faulty component in the processor cause this problem ? Any suggestions
Thanks , Dave
This is the 1 st time in 6 years that it has happened. Can a faulty component in the processor cause this problem ? Any suggestions
Thanks , Dave
- ...
- 14 posts total
I blew out an old CROWN preamp - the DL-2 - by a static zap. Try to ground yourself just to be sure, before you grab the control of anything. Or use a humidifier. Bob Wood http://www.GreatHomeTheater.com/stereo.html |
Grounding straps for listeners... the final tweak. LOL. There was a preamp that had a grounding fault that caused it to absolutely self destruct after being zapped by static. I have an old NAD that I zap every day. It just causes a "pop" to go through the spekers. So far no damage. I wonder if I were to strap it to the CDP if it would bypass the amplifier on its way to ground? |
- 14 posts total