Yes you did ask. I've gone down this road with George. Bottom line he gave me the schematic, but warned that overall this is an inferior design due to the difficulty in matching the additional LDRs (versus single ended operation). In addition, if you can get one built there could be a higher probability of reliability issues, again due the higher number of LDRs to achieve balanced operation.
That being said I recall Audiogon member Dave Garrettson trying to match LDRs for balanced operation to use as a volume control internal to his Atma-Sphere MP-3. He gave up on the effort IIRC. There have been a few people on DIYAudio who have tried to build a balanced unit. I didn't sound like it was a lot of fun.
You really should try it single ended into the M-60 amps. You're going to be really surprised. I get the balanced thing, especially with Atma-Sphere components due to their supporting the 600 ohm standard, but the LSA is quite optimal with these amps too.
That being said I recall Audiogon member Dave Garrettson trying to match LDRs for balanced operation to use as a volume control internal to his Atma-Sphere MP-3. He gave up on the effort IIRC. There have been a few people on DIYAudio who have tried to build a balanced unit. I didn't sound like it was a lot of fun.
You really should try it single ended into the M-60 amps. You're going to be really surprised. I get the balanced thing, especially with Atma-Sphere components due to their supporting the 600 ohm standard, but the LSA is quite optimal with these amps too.

