Jeff Rowland Pre with Pass Labs X350.5 or X600.5

I don't want to bypass the Capri. I want to listen to source "A" in my main system, and also send a line-level signal of source "A" to my second system. Does that fit the bypass feature of the Capri. It doesn't fit what I traditionally consider the function of a bypass circuit.

I greatly appreciate receiving the manual from Guido. I'll take a look at it.

Yes Tvad, you can use both Line Outs at the same time with the Capri. The Bypass Input can be used as a third input for your Transceiver which, in turn from what I understand, can accept additional inputs. So you've got three line level inputs on the Capri ("1" can be converted to phono) and two line level outputs that can be used simultaneously.

You can control the volume of both outputs from the Capri, but they'll both be at the same level. If you want different volumes in different locations, then you'll need at least one remote volume control.

Dave

I require a fixed level output, like that in a tape loop output. I cannot use a line level output to the transceiver.

06-02-08: Tvad said:
"I require a fixed level output, like that in a tape loop output. I cannot use a line level output to the transceiver."

Ok, the Capri doesn't have that.

Dave

Thanks, Dave. You saved me some time reading the manual.