Class D amp with Tube Preamp Combo?


Have you ever tried a good class D/T amp & tube preamp combination? I have read their can be some occasional problems matching these together?

I was thinking of going this way to get the drive, clarity and efficiency of the switching amp combined with the warmth and full body of the tube pre amp.

What setup are you using?

My first post by the way! I have been reading this forum for the last two weeks learning about audio and what to buy for my first serious system.
jaffa_777
After my earlier concern expressed in the earlier post on 26/7/08 , I continue to log long hours with Supratek Chenin tube pre + Bel Canto Ref 1000 combintion. After 2 weeks,the ICE power amp sound has changed quite a lot.
I was initially told they've about 200 hours on them but the seller later said they would be lucky to have 50 hours playing time before i got them. Hmmm..
I later emailed Mick Maloney and he clarified that Chenin output impedance is actully 200 ohm , not 600 ohm i stated earlier and with the 20 kohm balance input impedance of the BC Ref 1000 matching should not be an issue.

As for the sound, the veiled, congested and rolled off sound i heard a few weeks ago has definitely disappeared. The top end has more sparkle and instrument separation is better now. These changes are not that subtle to my ears. I could hear some graininess in the HF region from a few recordings again and i certainly hope this won't get more pronouced as i can't stand sibilant sound. It's not all rosy though as another impression i get is the bass is just a bit plodding and PRAT could be better relative to my old amp. Over the two and half week period, i did put my Bryston 4BSST back in 3 times just to compare and confirm my impression.

I think burn in is definitely real with these ICE power amplifier.I was all ready to sell them 2 weeks ago but now i think they could be long term keeper. May be..

Hi Jaspert, there are only 3 things that matter when inserting switching amps in a system: patience, patience, and more patience. Once you have logged a little over 1000 hrs of playing time on them, the BC will probably be starting to give you their best. . . and at that time you'll know if they are truly for you or not. G.
There are a lot of wizened people contributing to this topic. Several are mirroring my experience over the four years I went class D over conventional amps. What I thought was really cool then would be nonsense to my ears now. With the narrowing down the components that do work, and those that don't my sound has taken leaps to ever more accurate fidelity. Like Guidocorona says, Patience is needed.

Oh, on topic, I am using a class A preamp of unearthly quality. The tubes are in the non-oversampling DAC.
Bostonbean thanks for the kind words on my system i've put in alot of time and effort to get the sound i am receiving now which is to my ears is superior. Imaging, sound stage, bottom end and air along with a super 3 D delivery. Along with many different components going in and out of the system the wife and myself have logged many hours enjoying music with it.

Muralman1 i have gone the upgrade route with my amps two offered in the past 3 years. One of the best moves in the right direction was going with a tubed preamp with Siemens cca tubes using my class D amps. I also think that my preference to analog playback with vinyl adds to what my amps and system can deliver. A very easy to sit and listen sound.