Jeff Rowland 501s and PC1s

Clavil said:
"I talked to my dealer asking him why he didn't recommend to me to buy the Continuum 500, he said "if some day you want to change your loudspeakers, we have better possibility to tune the system with the diferent power cables precisely on your new loudspeakers. Nevertheless it would be very interesting to compare my combination with the Continuum 500."

That sounds like an excuse to me. Selecting from the speakers that will match well with the Continuum 500 presents a very broad selection. The C500 can use any power cable. I would only agree with him if your speakers are very distant from the preamp.

Dave

Hi Dave,

well you have to recognize that with 5 power cords instead of 1 you have some more margin to play with. The combination also allows to change the preamp ... for ex. go the Criterion ;-)

I would only agree with him if your speakers are very distant from the preamp.

I find big diferences beetween power cords, interconect and speaker cables also when they are short. You can really define a way you like and go quite far on it. I feel even that sometimes that cables can make more difference than preamp, amp or Cd player.
Just my opinion

Clavil

I understand what you're saying, but my approach is to eliminate PCs and ICs. I think of them as added to potential distortion rather than being an opportunity to "tune" the system. In keeping with JRDG design philosophy, "keep signal paths short and simple."

If you're likely to move up to the Criterion and 312, then it makes sense to me, but not so that you can use more cables. ;-)

Dave

Hi Guido,

I have finally received today the original JRG cables to use between PC1 and 501. I am afraid theses are not the same ones as in the US, as they are not "pig tails".
Anyway it is obvious that my modified NBS Monitor 2 are quite better:
Stage imaging more deep and better outlined musicians, sound with more power and bass.

Clavil, are you using 1 or 2 PC1 devices? The 501 monos require 2 of them. You should allow for about 300 hours of break in on the PC1s before they stabilize. Guido