Someone school me on this stuff


Hey all,

I am very new at this, but would really love to get into it.

I was hoping someone could give me a layman's breakdown of all this.

Benefits to integrated? Benefits to separates?

Let's say I had a turntable, and a CD player. What would I need to make a system. Perhaps an example of integrated as well as separates.

Thanks,

Kyle
kyleandrus
For the sake of argument, no budget???

he must work on wall street.


....or Congress.
Correction - Ultrasound Otello is not an integrated but just stereo power amp - sorry.
Jeez, you guys are tough!!

FIRST, SET A BUDGET!!!

Use a set amount of $$$ for power(integrated or seperates), and do the same for speakers and one or two sources. If you are new to this your tastes may not be discriminating enough to warrant a $10k cd player. You can find great cd players for $1500(the Cambridge Azur 840C for $1499, the Rega Apollo for $995, or the Sim Audio CD-1 for $1500); and a VPI scout turntable and tonearm combo with a Lyra Dorian cartridge can be had for around $2500. Add a Lehmann black cube as a phono stage--sometimes called a phono amp or a phono pre amp--and you have two really good sources for lesst than $4000 retail!

For speakers--you may want to start in the $4k-$5k range. Again, try Focal, B&W, Revel, Vienna Acoustics, Totem, and Dali for a traditional cone speaker. You may want to give a listen to planar or electrostatic speakers such as Martin Logan or Magneplanar as well. All of the above manufacturers have speakers that fall well within the $4-$5k range.

The power can also be had for $4-$6k--integrated or seperates. Check out McIntosh for a solid state integrated or Audio Research for a vacuum tube integrated.

Try Acoustic Zen or Nordost for cables as they are popular and may be sold easily if you want to try something different.

You should should be able to build a good starter system including seakers, power, cd, turntable/cartridge, and interconnect(cables) for $12-$15k.

I am using these prices as a starting point as you are new to this and again probably do not need a $500,000 audio rig(at least not yet!!)
Start slowly and buy some more popular brands while you are learning as they will be a little easier to sell on the used market when you decide to upgrade as you learn more about your listening preferences and tastes.

I am now on my "last and final" set of monoblock amps---yeah right!!

Go visit a few local dealers and talk to them and spend some time listening to different set ups.

Don't forget to ENJOY what you are buying and listening to.

Hope this helps a little,
Pepe
Separates are in theory better then single box amps. But also cost a lost more. With some brands half or even more of the production costs go into the box. A well constructed box for an amp is nice but CNC machining a piece of aluminum is not cheap. Also with separates there are cable isseus, matching issues, the requier a lot of space espacialy if you go mono amp/bi amp with sperrate power supply way.

First of all listen to different speakers, to determine what kind of sound you like. Go to a shop where they have a proper SS set on wich you can try many different speakers. If you have found a brand/sound you like remove the shop set and start looking for an amp that can make the most of the sound that you like. I would advise some nice monitors with an intergrated amp. In a room like that.

Sonus Faber Guarneri Memento or Totem Mani 2 sig with Symphonic line RG10 mk4 reference it all depends on budget.

Then when you have you system setup in your room start to think about some cables.

I would strongly advice to stay away from to many separate boxes and tube power amps.