New Linn Majik-i or Naim Nait 5i with Linn Ninkas

Well, I'm definitely leaning toward the Naim.

The local Linn and Naim dealers are different. I have a good relationship with the Linn dealer since I've purchased several things from him. I'm sure I could work out a good demo with him. The Naim dealer offered an in-home demo of the Nait and I've never spoken to him before so I guess he's fairly confident I would like it. I don't think they would be mismatched but either way a good demo is possible.

I just can't quite get past the Linn prices, even if their stuff works really well together. For the price of the Majik-i, I could buy the Naim plus a seriously good CDP. For the price of Linn seperates, I could buy the Naim, a CDP, a new 46 inch flatscreen and some Dali speakers!

I know you get what you pay for, but the Naim is a great integrated for the price. So thanks for the advice.

The Majik is not right to drive the Ninkas. The proper setup would for those speakers would be to go with a preamp and two amps with aktiv cards. The Magik is best suited for small to medium bookshelf speakers.

Im my opinion the Naim Nait5i is an outstanding bargain.
The cohesiveness from top to bottom is truly outstanding in this price range in SS integrated's. I did own Linn gear before but I have been converted to the Naim.
I am personally using the Nait5i with Totem The One, along with a Transporter as my source in my Living Room setup.
Good luck,

Dpitone is right IMO. The Ninkas are listed as 4 ohm in passive mode which usually means 2 8 ohm mid woofers wired in parallel. In active you drive them with different amps so you see an easier load. The woofers are listed as 8 ohms in active to be clear in case you don't have the owners manual. Trying to drive a 4 ohm load with impedance drops to what 2.5 ohms (who knows as Linn doesn't say) requires an amp that at least comes close to doubling power output at 4 ohms IMHO. I doubt the worthy Magik does that. I tried a Pass Labs amp with Ninkas and they really drove them better than Linn gear did. Again this is my opinion after looking at what info is supplied by Linn and a bit of experimentation. They can sound pretty good once you power them right.

I am surprised at the responses your getting, I recently purchased a pair of used Ninkas and I am driving them with a Thule IA100, only a $1,500 amp...works fine. Keep in mind the Ninka @90 db's is not sensitive( i.e. easy to drive) I don't see why the Majik-I would not work. I am also considering this now that I am in the Linn line. Unless you really don't like the speakers, I would match within the Linn line and forget the Naim. I have heard an ALL Linn system before and they are designed to work together. Also, Naim does the same thing!!! Naim gear mixed with other non-Naim gear and you lose a lot. Naim is also not cheap. Let me know what you do I am curious as to your experience. I like the Linn sound personally, Pitch accurate and very clean.