Jadis JA30 - Quad ESL63 .. 4,8 or 16ohms?


Hello guys ,

I have a friend who owns a pair Quad ESL63 and he drives them with two Jadis JA30 KT88 monoblocks
He always used his JA30 with 16 ohms internal setup .. but we have read somewhere he could get better result setting his JA30 for 4 ohms
Do you agree or did you have better results with other settings?

Thanks to EveryOne for your opinions/suggestions
128x128curio
why not just try for yourself and hear the difference

4 ohms will have a tighter but somewhat dryer sound
Because it's useful , if not necessary , to listen and compare your experiences .. Philijolet
Just to chime in with my two cents, my ears always preferred the 8ohm taps with my Jadis amps driving the ESL63s: Sweet highs, good warmth, not exaggerated and a decent bottom. 4ohms made bad CD's sound even more awful and I did not like the high end with 16ohms, if I recall right.
Thanks Detlof .. what you wrote is the exact result my friend is getting with 4ohms JA30 setup
I think too the 8ohms setting is the best because stays in the middle .. pratically he won't lose the grip on the low frequencies and won't lose the highs presence
Hello Detlof,
What's type of tubes you have equipped your ja30 ?
power tubes KT88 or 6550 ?
for the drivers, witch type of drivers you have( ecc82 and ecc83 )
Thank's