High Fidelity Cables CT-1designed by Rick Schultz


In December 2011,I wrote that High Fidelity cables led by cable designer Rick Schultz was putting together a new cable.The cable came to market as CT-1.The CT-1 has FINALLY made it into my system!I had obtained a version of the prototype that Rick had been working on.It blew my previous reference Genesis by Virtual Dynamics.I thought I had finally found my end with this cable.This prototype delivered to my ears "Nirvana".Could I be at the end of my quest for the ultimate sound?
No. I received two pairs of CT-1 to replace my prototypes.They went into the system this past Friday.Unable to dedicate time until Sunday listening,I stole a few moments,ducking away from company with anticipation.My guest could tell even with the music set for"ambiance"something was intriguing and I was in for a treat!
The experience:
First off,CT-1 was very user friendly.Installation was simple;the cable is very nice and light.The female RCA fit beautifully unlike any I had found in other cable.It was secure and reliable.It seemed much thought was dedicated to developing a designer fit to an aesthetically stunning RCA connector.Install entailed a few wiggles to ensure what seemed like a compression fit on my RCA.
It was 2-3 hrs. for the 1st step of break in to be complete.At that point I had something different!Today,although they only have 10-12 hrs. on them,I can`t put into words how much my system has transformed.Believe me,I loved my prototypes.However....there is simply no comparision.
The clarity and sound is so natural.
The soundstage is like nothing I ever heard.Resoulution is breathtaking and inner detail is simply hard to believe possible.
The sound has transended and now it simply does not seem as thought I have speakers.
My system is musicians playing music.
I am told with time they will improve and I trust that as it was revealed with the prototypes.I wanted to share my thoughts with you that now.
Unequivocally,a testament to High Fidelity,as the name declares.
High Fidelity Cables for me,the last word on it,after 12 hours!
Truly Amazing

Al
alpass
I was going to use a CT1e as a digital interconnect between my Bryston BDP-1 and Lampizator L4G4 dac. I thought the BDP-1 had an RCA output but it is limited to BNC. I guess I will join the queue of those waiting for AES/EBU unless a BNC/RCA adapter would work without degrading the signal / magnetic effect.
Chatnoir, Iblieve, about the wire size of Ct-1 series.
I would add that I had to learn to think differently about the High Fidelity line.
My decades of understanding of wire and it's principals DOES NOT APPLY HERE.
Magnetic conduction is quite different, and , I believe, a superior new concept.
The improvement up the CT-1 line comes mostly from stronger magnets rather than bigger wire or better wire configuration.
A gross simplification of the design might be "The wire was developed for it's magnetic transfer qualities rather than standard wire with its focus on electron movement".
It seems very likely to me that Magnetic conduction will improve all electronic
device's power and signal paths, and more. think power lines, vehicles, medical....
Chatnoir, since the High Fidelity concept includes the idea that the magnetic conduction influences component inside and since they make a phono cable with a DIN connector, I would say get one of the digital cables and the appropriate BNC to female RCA adapter and give it a whirl.
Thanks Ddraudt. I didn't make myself very clear in my message. My concern is with thinness of sound and not the wire gauge. I'm afraid it's moot anyway as I can't use an rca digital cable unless I can either use an adapter or modify my Bryston BDP-1. I'll probably just wait until I can buy an AES/EBU CT-1e.