Passive preamp vs. powered


I have a custom made passive pre-amp that I purchased from A-gon some months back for about $150. It only has a volume control and 2 inputs - perfect for my needs.

It sounds excellent...

My question is... what would be the advantage of a much more expensive powered pre-amp? Sure, maybe I would have powered switches and more inputs, but I don't need any. Are there some differences in sound quality that I'm not hearing?
djembeplay
There could be. Don't you have a powered pre you could A/B with? Passive pre's work great, but it also depends on a few technicalities. Since the whole idea is not to influence the source signal, there is no amplification of the source. Sometimes, depending on your amplifiers, there may be a situation where a slight boost is needed to attain best performance. You will have to experiment to get an "ear" on the situation. Placette makes one of the best passive pre's in the market. I have been looking for a RVC (remote volume control) from Placette to use with my Wyetech Opal.
A powered preamp adds very little to most high level inputs, like CD and such. Some phono pre-preamps require a powered pre to sound best. Many CD machines with a volume control do not need any preamp.
Preamps are from back in the day when all anyone had was a TT, a tuner, or a cassette machine. Then you wanted the preamp for it's phono section (which by its nature HAD to amplify the signal) for TONE controls and a balance control, and for tape selection. Most input signals to a preamp USED TO BE .25 volts.. and then the pre would out a bit more.. up to 2 volts. THEN.. everyone dumped the tones controls.. and as CD arose, most dumped the phono section. And since CD output was 2 volts.. (the usual "LOUDER IS BETTER" trick)the preamp stopped having to amplify anything.
So NOW, most preamps are glorified volume controls only. (though most still have a balance knob.. and a 'tape' in/out. and a selector switch.
So unless you want the preamp as a 'tone control', the preamp to be the crown jewel in your system, or need it for your particular phono section, then a passive is just as good or better.
I being an 'old fart-ess', still always use a preamp (my current items are a Adcom 750, and an Audio Research SP15)
I have a Creek OBH 12 Passive (with remote) and an Audio Electric Supply (AES by Cary) AE3 tubed pre. While both sound good, the AE3 makes accoustic guitars sound more like wood and vocal just sound better. You must trust your own ears.
Happy Listening