2. amps-preamps
  3. 1260161476

Supertube Question

I recently took the plunge and bought 6H30P-DR "Supertubes" for my ARC LS26...I couldn't be happier. I'm not good with audiophile superlatives, but in Spinal Tap lingo, it now "goes to 11".

The improvements are so exciting that now I'm wondering what improvements might be gained from using Supertubes in my ARC VT 100iii...which has 2 6H30 tubes per channel, used as "drivers", whatever that is. I'd appreciate hearing from anyone who understands amp architecture and could explain whether tubes used as "drivers" would likely benefit from the upgrade as much as the preamp.

Thanks for all your observations, and Merry Christmas to all...
77jovian
theo's avatar
theo
2,331 posts
 
Can't speak to the amp improvemnets but I want to add that I have added the BAT supertubes to my LS26 and have found it well worth the investment. I can only deduce that if we both found a marked inprovement in pre-amp performance that
you would realize a similar improvemnet in the amp. I would assume that the bass will tighten and the soundfeild will increase. I guess I would just do it. If you don't notice anything then you have two extras for the LS26.
And as a final note A Merry Christmas season to you.
plato
1,543 posts
 
Can you simply swap out 6922-variety tubes for the 6H30's or did you need to have the circuit modified to do that?
mofimadness's avatar
mofimadness
4,152 posts
 
6H30's can't be swapped in & out for 6DJ8 and equiv. And vice versa. Different voltages and pinouts.

The driver tube in an amplifier, IMHO, would not benefit from a "DR" upgrade. I really don't think you'd hear a difference, but I've never tried?

Theo, you're welcome for the advice to upgrade to the "DR" tube :-) Told you so...
More to discover