Fosgate Signature Phono Preamp

I do NOT have a Fosgate, however. The noise is 'tube noise' and probably can be aleviated by getting different tubes. They use pretty generic tubes out of the box.. If you are demoing it, see if the dealer can find some other aftermarket tubes.. tell 'em it will be more likely to buy AND you will buy the extra tubes regardless. For $15/$30 bucks it could be worth the try. It probably is only ONE of the tubes that is critical and making the noise.

I have this Fosgate Phono pre-amp and would like to offer up some comments. Over the years, several high gain solid state phono pre-amps have passed thru my system. Most were very quiet, but two in particular (shall remain name-less) had a noticeably higher noise floor than the all tube Fosgate. For a high gain phono pre-amp that takes 7 tubes, its remarkably quiet out of the box. IME, I can assuredly state that the rating of 60db is quite conservative.

Speaking of tubes, this pre-amp is a tube rollers dream. As one would expect given its design, the unit responds to each and every tube swap. Very easy to tailor the sound to one's personal preference. Additionally, you are rewarded with an even lower level of noise.( Don't get me wrong, its sounds good with the stock tubes as well.) I have little to no tolerance for noisy phono stages and its a non-issue for me with the Fosgate. My speakers are 90db efficient, and will easily reveal any annoying tube "noise". And yes, I also own a solid state phono stage that is virtually silent to make the comparison. I run my phono stages thru a modified Cary SLP-2002 tube line stage that itself is dead silent.

For those that are serious tube phono stage aficionados , with a large NOS library. I'd say this unit is a must audition.

Here is the tube compliment I've settled on after an evening of experimentation. I'm pretty content right now with the way it sounds with these tubes.

V1- 1966.......Amperex Holland 6DJ8 Bugle Boy
(other various vintage 6DJ8 BB also great)
v2- 1965.......Amperex Holland 6922
(other various 6922's also great)
V3- 1960's.....Telefunken 12AX7 Smooth Plate
V4- 1960's.....Raytheon 5751 Black Plate or Grey Plate
V5- 1960's.....Tungsol 12AT7 Grey Plate
V6- 1960's.....Tungsol 12AT7 Grey Plate

I have not experimented yet with the 6X4 power supply Rectifier tube, but plan on doing so in the near future.

Marlon and Reb1208...how would you describe the sonic attributes of the Fosgate amp? Marlon if you could compare it to the Moon LP5.3 with PSX5.3 power supply (I have heard that phono and so the comparison would be veryy helpful). Reb1208..also interested in your descriptions of the sonic attributes of this phono before and after tube-rolling. I am curious about this amp and don't have the opportunity to audition locally. Thanks very much.

Sonic attributes, I'll address regardless of tube compliment. To me, this unit sounds exactly like the circuit its built upon. Have you ever heard the clarity of a DC powered phono stage but wished it had a little more oomph? That's what you get with the Fosgate. A very clear, deep, wide open space that lets an unforced, natural musical flow come through. The signal path tubes are powered by DC fed from large storage capacitors. The power supply is fed AC and high voltage rectification is achieved by a 6X4 rectifier tube. That's where you get the extra little oomph, that's missing in other DC powered stages I've heard.

Rolling tubes, you can really enhance dynamic contrasts, bass punch, extend bandwidth and get the sound field well off the speaker cabinets. With the stock tubes, the unit leans toward a warmer and more relaxed presentation.

Being that this is an all tube unit, don't expect "stump" puller type bass response. So if your speakers are in need of some extra help in the bass, the Fosgate won't add that to the signal- it's a rather neutral and accurate piece. (However, the supplied 6X4 JAN Philips rectifier tube is well known to be softer in the bass. A NOS Tungsol or Raytheon 6X4 will definitely deliver more bass power) Ahh, but if you want to hear a drum kit sound realistic- this unit will give you that in a way that solid state can't touch. It's also quite capable of resolving low level detail, you may hear sounds and vocals previously unnoticed.

Thx for the feedback Reb1208.