Receiver with no phono input: Solutions?


After some research and discussion, I'm going with the Pioneer Elite VSX-32...it's well reviewed and recommended and it fits my bugdet for home theater, but doesn't completely fit my needs.

There's no phono input...and I've read about phono stages, but unfamiliar in their application.

Is this expensive? Is it practical? How does this sound?

I do plan on adding another amp to this system to power my studio 20's...can a secondary amp have a phono input? If so is this the best option and what's available for around $500-$600...and I don't mind purchasing used.

I admit, I'm new to all this and don't really have a clue, but I'm trying to learn from the knowledgable people on this site. I'm trying to break into the high end audio and video arena and need some help. Thanks everyone.
dufrain
there are entry level phono input boxes sarting at 100 dollars and tube phono inputs for thousands and everything in between. music direct and audioadvisor sites can give you some ideas. how important will lp listening be to you? how much do you plan on budgeting for a turntable and phono cartridge? i would want the components to be matched but if you are just going to play some lps now and then there are turntables with a phono preamp built in. the good thing about audio is there are lots of options. hope my ideas helped.
I would start with the phono preamplifier section of Audiogon

http://www.audiogon.com/cgia/fsb.pl?preaphon
I listen to my records every day...on a really old POS turntable and I'm ready to upgrade. So, it's important that I get nice quaility sound...but I don't want to break the bank. As far as my budget I guess under a $1000.00 for my LP listening budget...whatever that's going to take, i.e. turntable, another amp?, cartridge.

I'm just really confused on how to tie this in to my receiver if I have no phono input. And the nearest HI FI place is about 3 hours away.

Should I run a completely differnt dedicated amp that powers the Turntable but then how does this line out to my speakers?

Sorry, I'm totally confused and I just moved to a small town and there's nobody here to go in and demo, research, talk to about this stuff.
The inputs; tape, aux1, aux2, etc. or however they are labeled on the back should be all the same as far as impedence. A phono preamp does only two things differently than these imputs-

RIAA curve correction which means it corrects for a very non flat frequency response that a cartridge produces from vinyl.
The phono preamp will also ampliflies the ever so tiny signal that the cartridge produces.

The end game is that an external phono amplifier may with RCA plugs go into your input of choice and work fine.

Any corrections to this by other members would be welcomed.