Jolida 302 b disaster


So it appears that my jolida 302b's power switch is going. Sometimes it works and sometimes it shuts down shortly after powering up. This started right after I sent the unit into jolida to have the factory mods done and have the RCAs replaced. I contacted jolida and they said they'd send a replacement switch but no sign of it after a week. Once i get the switch i still don't know what to do with it.
Is there anyone who lives in the madison, wi area or knows someone in the area who would know how to replace the switch. I am aware of paragon in madison but would rather not have the work done there.
Does this seem like this is Jolida's fault or should I assume it's unrelated to the recent work done? Any suggestions as to what I should do?
roggae
I realized this was not a disaster but neglected to retitle the thread. Thanks for the reassurance folks.
And make sure that the unit has been powered off for 10 minutes or so. This will give the caps enough time to discharge...

-RW-
If the Jolida does not use bleeder resistors in the design it can possibly store lethal voltages for hours and even days after being powered down.
Fixed problem. Took apart switch and bent the contacts back to make contact. Easy.
Jolida 302 does not have bleeder resistors, just like most Chinese amps.
Power up with no tubes and it will store B+ almost forever :)