Preamp Deal of the Century


If anyone is looking for a true "World Class" preamp at a very fair price..heed my advice. I just recieved a Supratek Syrah preamp that was hand built by Mick Maloney in Western Australia, and it is absolutely beautiful! This preamp is the best deal you will ever find. I would put it up against any preamp out there for both looks and sound. Price? $2500 for the Syrah (includes Killer Phono stage). Not into phono? Try the Chardonney line stage for $2100. Don't get me wrong, I am not associated with this company. I am just a very happy owner! This preamp is VERY dynamic, yet liquid. It conveys the sound of music better than any other preamp that I have ever heard! You can check out the Supratek website at www. cantech.net.au
slowhand
Swampwalker: The toggle switch on your right as you face the unit should be set such that its pulled towards yourself. I had the same problem when I first got my unit back in 08/2003. Hope its the same issue with yours. All the best...
Thanks guys, but this unit does NOT have a tape monitor loop. A second set of main outs and an additional input, instead.
Swampwalker - there is a gain attentuator on the back of the syrah that is independent of the volume control, turning it counter-clockwise opens it up. Make sure your input and output are selected properly. Other than that, you should go to Mick.
Swampwalker - This may seem pretty basic but this "problem" sounds like the wrong input is selected via the knob on the right front of the preamp. You could be hearing cross talk between the active input and the currently selected input.

Check that you do not have the RCA cables from your EMC1 plugged into the wrong RCA inputs on the Syrah - that ones you used to have them plugged into. Double-check.

Also, if your Syrah has balanced output, the RCA/XLR switch in the back between the RCA outputs and the XLR outputs could be flipped to the middle or toward the XLR make sure it is toward whatever output you use... RCA or XLR.

If all connections and input selections are correct, try turning off the preamp, unscrewing the DC power cord from both the power supply and the preamp - and then re-attach.

Sometimes if the DC power cord is not connected properly, everything appears to work (tubes light up) but nothing can be heard.