Removing power conditioner...

Also, for a powerstrip.. make your own.
Go to a Menards like store, the electrical stuf has outlet boxes. One type in particular is great for home made outlets, the boxes are two receptical, or one, metal, smooth finish with afew holes in the sides bottom, with plugs for some holes.
Then there are some small plastic plugs that screw into the holes woth openings for wires with a seal.
So you buy some nice wire, a Wattgate pluge, and a bunch of recepticals from either the better selection at the Menards. or from an audio specialty site, assemble the outlets, and they can be daisy chained so you have say three sets of two receptical outlet packs.
The boxes sit nicely on the floor. use any outlet cover, I use brass ones.
They work well.
The receptical boxes are about $4 each, Recepticals the $3 ones are great, the Wattgate A/C plug is $7 and some good wire.

Elizabeth,

What do you plug into the PPP vs the PP600?

I recently sold my Audience power conditioner and went with the Wire mold. Sounds better and cost 3000.00 less.

The power cable feeding the power conditioner is absolutely critical and often the weak link of any conditioning system. Many cables just can't keep-up. I've experienced this multiple times.

On the other hand, an excellent power cable on a great conditioner or well-constructed power strip can benefit the entire system.

I use a Furutech e-TP80 with good results.