Removing power conditioner...

Power House AUDIOPARTS INC, The POWER HOUSE Outlet Strip 6.
Or as suggested make your own using better outlets. However use an IEC so you can use your own high quality PC.

For Roscoeiii: the Furman REF20i has all the video, and the amp, a Bryston 4B-SST2
The PS Audio P600 has the digital stuff, A Behringer DEQ24966, Adcom AD700, Sony SCD777ES, Sony SCD555ES Sony SCD333ES and set to 90hz output frequency instead of the usual 60hz.
The PS Audio PPP set to 'Multiwave' has the Tube Buffer, A VAC Standard tube preamp (sort of big for a buffer to ameliorate the digital grunge, but it works well) the Bryston BP-26 preamp, An Audio Research Sp-15 I use just for it's tube phono section on my second TT. The SinglePower MPX3 tube headphone amp a Lil'Dot III headphone amp
(I just tried the Adcom DAC on the Furman, as it did not sound as good running at the 90hz.. So i do try different stuff here andd there..)
I like keeping the load on the two PS Audio low, then they do not get too hot while running. Both PS Audio regenerators run very cool as it is now.

At the level of involvement you have in your system, adding more dedicated circuits would likely be a relatively minor cost, comparatively, even if you had to change panels. John

Ahhh, yes. A troubling subject for most of us...what when where and how of power products! As you know from our chat, I use Acoustic Revive RTP Ultimate's. They lay somewhere in between a power strip and conditioner. Basically, it is a solid aluminum box with Oyaide R-1 outlets modified to AR's spec but there is also some filler in the base of the casing that absorbs RFI/EMI and other nasties. The manufacture's description reads like some type of voodoo but it really does add a natural, organic, musical flavor without any real ill effect. It has no moving or mechanical parts. There are some pretty impressive reviews if you do a quick search. I find it hard to listen without them. They are also no limiting and I even am able to plug my massive Krell into one. I never thought that possible. The one downside is I occasionally get some ground issues, some devices don't like to be plugged in to them. I would guess it has something to do with how AR handles the ground inside the case.

I can't deal with the power conditioners that I have heard. They all seem to have a nice wow factor but after some time their tricks become more noticeable and I realize that some bad stuff is happening to my music in order to give me that magic black background and perceived clarity. None for me, thanks!

I would say for me, it all depends.

at one point I had my amps into a PS Audio p1000, and my front end into a P300, all into the same wall circuit. I sold the p300 and found i huge detriment. I bought another p300 and all was well again.

I then found an ESP Reference power strip, decided to swap the stuff from the P300 into the ESP. Due to some power cord lengths, I could not put all the prior P300 stuff into the ESP. I didn't care for the results-----I then decided to use a different outlet for the ESP and had all front end into the ESP----now the ESP sounds better than the P300. I have been too happy with the current set up to tear it down and try the P300 into the same separate circuit--but I guess the moral of my story is, to make sure you can to spread the system to as many separate outlets as possible