Monoblocks out of phase on dedicated line

Am I on the correct path of having my 2 monoblocks out of phase from the AC dedicated lines. The difference is 1 to 2 volts at the most between them.

Thanks

melanco06-25-2012 11:13pm

...
5 posts total
View entire discussion

melanco OP Details Discussions Posts This discussion Message User 29 posts 06-26-2012 at 03:29am Copy Comment URL Report Comment Edit Delete Poor Man's Dedicated Line. Any thoughts?
elizabeth Details Discussions Posts This discussion Message User 6,726 posts 06-26-2012 at 04:36am Copy Comment URL Report Comment Edit Delete The problem of using both phases in one system is if a fault occured. Then you would have a 240 volt possiblee fault if you touched the wrong things, it it might also destroy some of your other stuff. 240 volts is a lot. So that is the reason to use only one leg The interconnects from each amp go to ONE preamp, so one or the other will be taking the chance for the 240v fault.
melanco OP Details Discussions Posts This discussion Message User 29 posts 06-26-2012 at 05:04am Copy Comment URL Report Comment Edit Delete I see. Which phase should I use for my 3 dedicated lines? I measured both phases without any appliances on them and I get around 122v in one phase meanwhile the other phase is 124v/125v. Thanks

5 posts total
View entire discussion

More to discover