Optimizing the Prima Luna Premium Integrated amp


Having had the Prima Luna Premium Integrated for about 7 months now its been one of my goals to retire the CJ PV10A I had been using for pre amp. However from the start the preamp section of the Prima Luna never seemed to measure up to the CJ in deep bass. Recently however I decided it was time to retube the 12AU7's in the CJ, sticking with trusted NOS Mullard CV4003's. Now having 2 pairs of Mullards to play with I was able to do some comparison swapping in the Prima Luna. Lo and behold, putting the Mullards in the rear 12AU7 sockets of the Prima Luna brought the low bass up to where it should be and differences become trivial swapping a variety of 12AU7's between the CJ and the front sockets of the Prima Luna

Mullard NOS CV4003 highly recommended for the back 12AU7 sockets of the Prima Luna Premium integrated. Not so recommended for both socket pairs as the combination becomes too forward in the bass. Funkwerkes 12AU7 and Prima Luna 12AU7 are in use now while I seek a quicker more neutral tube than the Mullard for the front pair.
128x128davide256
I've continued tinkering and over the last few months of tube rolling repeated, varied A/B comparison has led me to 1 inescapable conclusion.
In the PL Premium Integrated while the GL KT-88's are wonderful tubes with tighter control than the stock PL EL-34's at the frequency extremes, they fail on voices in the crucial mid range, with a dry papery affect. This is not a judgement on the GL KT-88's as I suspect in a different amp the issue would not exist, only a conclusion that in the PL Premium Integrated they aren't the best choice.
Additionally after rolling various 12AU7's in the front sockets (Mullards, Siemens, GL, Groovetube, EH) and then trying other 12Axx varieties its become crystal clear that 12AU7's are not the best sonic choice for the front sockets. No matter what 12AU7 I rolled for the front sockets, the pre sounded compressed and sleepy compared to the CJ PV10A pre feeding the HT input. Rolling in 12AT7's gave immediate improvement in dynamics and "liveliness". Using 12AX7 was similiar but more prone to distort

Where I now get best sound is
Front pre sockets - Amperex 12AT7 (orange world logo)
rear pre sockets - Siemens ECC83 (12AU7)
power tubes - stock PL EL-34

The PL power tubes are not my final destination as they don't have the control of the KT-88's and combined with the NOS Mullard 12AU7's showed distortion artifacts which the Siemens did not.
What this configuration does well is create a lush detailed mid range, good mid bass, and a high frequency end where percussion has both hardness (blocks) and sheen (cymbals). Sound decay is good, not chopped off as it was with 12AU7's.
What this lacks is deep bass control and good "black space" around instruments. All of which I think will be improved with better EL-34's
On the fence at this point for future upgrade between between the SED Winged C EL-34's and NOS Siemens EL-34's.
NOS power tubes are frought with difficulties. They havent been produced, in the case of EL-34s, since the late 70s at best. Finding good ones is tough but I was able to buy some Philips XF3s I believe as a quad that did look new in box. The price exceeded $100/tube so be ready for sticker shock. I am aware that some of the big tube sellers have NOS outputs but rices are commensurate with thheir rarity.

Can you sub in the New Sensor Gold Lion KT77? That would be interesting. I am kind of surprised the KT-88 wasn't good in that amp. Another "super tube to consider is the "Tung Sol" KT-120 if the trannys can handle it, ask uncle Kevy?
Finally I would make a point of trying 2 current products that have worked out well for me. The Electroharmonix 6CA7 "big bottle" and the JJ blue glass E34l (note E34l not EL34 not a typo) very underated, don't try the JJ KT-77. JJs can be bought from a webstore US based called Eurotubes.com.
I will be interested in hearing the result. I noted that no 5751 made your preamp tube list, did you try them?
I may dabble with them at some point but the combination of the Amperex AT7's with the EL34's was like when you turn a knob and it clicks into place.... so many things were suddenly right I didn't feel a need to do more than fine tune the back 12AU7 choice for cleanest sound. I am hoping that when I upgrade the EL34's that the Mullards work well again as they were superb with the KT-88's.
Like Meiwan says, try the Mazdas.

Brent Jessee has them.

All the best,
Nonoise
Please try KT120s as I'm still waiting for a tranny failure incident report from anywhere. Also, I haven't raved enough about the Chinese made "preferred" 7025s from the tubestore. They are very "clean" sounding and put a more extended and airy (and maybe accurate) top end into my Jolida at what I think is a relative bargain cost. That part could explain why they don't get as much cred as the more expensive anything else. Don't be afraid to spend less! You can lie about the cost later.