Importance of line stage pre--Who Knew?


Well, I'm sure a lot of you knew, or there would be no $5K and up market for line stages.

As for me... This month marks the 40th anniversary of buying my first stereo with my own money. In all that time I've only had solid state in the signal chain except for a Jolida phono preamp and matching line stage I picked up a couple of years ago. It turns out that the tubes in those units were for a buffer stage to warm up the sound, while the gain was handled by op amps. Well, recently an audio buddy came by to spin some vinyl and show me a tube-driven line stage preamp he wanted to sell.

See it here.

This is just a simple, modest line stage preamp with 5-input rotary selection knob, balance, and volume. Five pairs of inputs, one fixed and two volume-controlled pairs of outputs on the back. However, it's a PTP hand-wired design with tube rectifier and large transformer. I didn't want to like it as it had a couple of deal-killers: 1) no remote control and 2) too tall to fit on my audio rack thanks to that outsize transformer. It would have to be a game-changer for me to consider getting it.

We tried it out in the humblest of circumstances. I set it on a Rubbermaid step stool in front of my rack and patched it into the signal path, bypassing the Jolida op amp/tube buffer line stage.

HOLY MOLY!

Game changer? Sh'yeah! After just a few seconds of hearing it you know it's not leaving the house. So what did it do?

It simply sounded more real and less electronic. It heightened the illusion of performers in real space making music. It took my system a big step away from a tune player to a sonic virtual reality device. Sonically the difference might be considered subtle, but in the realm of emotional response to the music, it was a big step. There was more separation between the various elements of the mix, and if you sat in the sweet spot between the speakers, you heard a 3-dimensional image of performers spread out before you. That physical separation also separates into audible separation. It was easier to hear how the musicians interact with each other to make music together--just like in a live performance. Instead of an amorphous left-to-right smear there was a sonic hologram of where the performers stood in the mix. However, this did not desconstruct the performance, but rather showed how the elements worked together to form ensemble music.

Timbres sounded more real: Brass had more blat when called for, more sense of air flowing through metal, of lungs full of air providing the energy for the resulting sound. Strings sounded pluckier, voices more human, acoustic instruments woodier... you get the picture. It made LPs sound enveloping with a nicely laid-out soundstage, and it elevated computer-based digital music from tolerable to involving and enjoyable, again with the 3-D imaging and wider-than-the-speakers sound stage.

Before picking up this piece, I was thinking of upgrading amplifiers yet another time. But I experienced a valuable lesson I had previously known more in theory--that for fine gradations of amplitude, tubes rule, and it's the low level--preamp and component level--signals that are most fragile; if part of the signal drops out at that stage, no amplifier will bring it back regardless of the amp's bandwidth, rise time, signal-to-noise ratio, or resolving power. The preamp has to caress and amplify those low level signals and pass them on to the amplifier so you can groove to them when they exit the speakers. Since all my sources--LP, CD, FM, iPod, and computer--run through this unit, everything sounds better,

In fact, one of the things I learned from this experience is that my $220 used 1981 Heathkit amplifier is even better than I thought. Paired with this preamp, it is still superb. Sure there are better and much better. But for now and some time to come, it'll do nicely.

Since picking it up I swapped in a set of Sylvania NOS tubes--a JAN (mil-spec) 6X5WGT rectifier (smoother delivery and better voltage regulation) and a matched set of '50s-era Sylvania 6SN7GTB triodes (even more liquidity, less grain, more 3-D imaging). I'm a happy man. Next up--sell off some electronics and get a tube phono stage from this maker.
johnnyb53
With tubes, the sins are mainly of omission meaning that they generally roll treble, round fast transients, and muddle things a bit in even the best designs. This makes the sound more "musical" at the expense of removing musical information, nuance and detail.

This statement is utterly false in every respect. Tubes can have bandwidth in preamps that is as wide as the best transistors- we get 400KHz out of our line stages. I imagine some tube circuits might do as suggested (its tricky to get wide bandwidth out of 12AX7s for example). But there is a reason that color TVs could be made with tubes in teh 1950s and that is because the tubes themselves have plenty of bandwidth (you need lots of bandwidth to build analog video circuits).

Additionally if anything I find the transistor circuits to be the ones lacking detail, not tubes, generally speaking. However transistors do make more odd ordered harmonics (which is the source of their oft-perceived brightness) which some might come to interpret as greater detail if that commission is slight. However I find that quite often what is happening is brightness is masquerading as detail- when you get detail and a relaxed presentation (read: able to listen to it all day and all night without fatigue) together at the same time then you are on to something.
11-05-12: Foster_9
This thread was about the insertion of a quality tube preamplifier and its affects on the sound of the system. It seems somewhere along the way it turned into a tubes vs solid state battle.
Usually does when someone makes a rediculous statement about one or the other
I don`t believe the OP`s post was ridiculous at all. He was simply happy with the improved sound via the addition of his tube linestage.It`s his opinion.I don`t understand why some feel compelled to tout 'my non tube approach is better' as it`s irrelevant to the original topic.If you prefer non tubes, great, start your own thread.
Regards,
11-05-12: Charles1dad
I don`t believe the OP`s post was ridiculous at all.
I wasn't referring to the OP.
When people post things that imply one topology sounds better to some people because it "masks other issues" (IOW - You don't know what good sound sounds like), or the ever popular "You've never heard what I like done right" (IOW - You don't know what good sound sounds like) it is inevitable.
As the OP I can say that putting *this* line stage in *my* system improved it in every way. I do like what tubes do in resolvving microdynamics at the low line level, but I've also heard SS units do impressive things at that level, particularly the Marantz Reference series that uses their proprietary HDAM gain modules.

The other factor is that although this unit flies under the radar and I was able to get a used one for $500, if I compare its features and build quality with the current market, it's equivalent to an overachieving $2500 unit such as one might get from Rogers, Rogue, or PrimaLuna. A SS unit at that price would also outperform the $299 (now $550) Jolida unit it replaced.