Pre-amp for Rowland Model 102


I'm looking to match a pre-amp to my JRDG Model 102 class D amp. I figure the Capri would be a good match since it also has a switched mode power supply, but, how well would a Klyne or Ayre K5xe match? Thanks.
feds
ZD, I only "measure" things with my ears, thus I apologize in advance for the unscientific and somewhat subjective nature of the following....

On the subject of treble intermodulation.... Frequently, on multipart string music, you may notice that there is a range of chorded notes, approximately in the 3rd treble octave, that have the habit of sounding rather harsh, distorted, and metallic. What I always look for is ways to make those notes sound like "music", without resorting to filtering effects.

On the subject of harmonic development.... if you listen carefully to piano music for example, you may hear the fundamental frequency, but also a set of harmonic frequencies that rise, sustain, and decay on their own terms.... this complex and evolving harmonic resonance is what gives an instrument some of its individual richness, or.... palpability.

My experience is that a PFC-based DC front end for an autoranging SMPS can increase an amplifier's ability to expose the complex behavior of independently decaying harmonics, and control a fair amount of treble harshness, without ever being perceived as a band-pass filter.

For example, integrated PFC rectification is one of the main differences between the class-D Rowland M501 monoblocks and the class-D M312 stereo.... Yes I know, there are other factors involved, such as higher quality transformer coupling etc... but.... M501 is a fun amp with a lot of power that sounds a little "matter of fact", while M312 sounds much more musical and emotional.... M312 Was my very favorite power amp prior to my adoption of the Rowland M725 monos, which while being based on class A/B design, are still fed by a PFC-based DC front end. Back to M501, the monoblocks can be front ended by a PC-1 PFC-based rectifier on each... Owners that have used M501 in such configuration claim that they rival the overall musicality of M312.

Warning, unlike Furman Elite, PC-1 transforms 120V AC into a 220V DC current... So do not feed it into any device unless the target component has an autoranging power supply, or it has been switched to 240V operations, lest.... you will be regaled by a cute puff of blue smoke and a slagged component.

Guido
Guido, PC1 converts 110VAC to 175VDC and 240VAC to 385VDC according to Jeff Rowland info:

http://jeffrowlandgroup.com/kb/questions.php?questionid=191

Most of the gear won't work with DC voltage at all because of transformer.
Guidocorona,

Thanks for the answer. No need to apologize for being unscientific, this isn't a classroom. Just to clarify, your description of treble IM, to me, sounds like its a matter of getting timbre correct. Not an easy thing to do but its extremely important.

Feds,

The above comments make me think what it is that I like about my Rowland 112. When I first got it, I definitely thought it was rolled off in the HF's. The more time I spent with the amp, however, made me change my opinion. All the information is there. Cymbals sound like cymbals and not like you took a piece of metal dropped it on a hard floor. I'm pretty sure I was mistaking the amp being rolled off, when it was just doing a very good job of making the HF's sound like what they are supposed to be, instead of noise. The amp does have some flaws, though. Thats why I was curious about your 102.
Hi Guido,

Thank you for the info, I had read your feedback on the PC1 a few weeks back. I think the PC1 (or a simple DIY OPS-U500-385 conditioner) would be a nice upgrade. Have you had a chance to compare the 201s with Lundahl transformers to the 102?

For now I'll keep looking for a used Capri or Klyne. The K5xe also a possibility.
Hi Feds, regretably, I have not had the opportunity of listening to M102. Looking at published specs, I suspect that M201 may yield a somewhat greater staging and imaging, and perhaps a bit more authority... M102 yields 100W over 8 Ohms and 200W over 4 Ohms with 11 Amperes of peak output current; M201 is rated at 250W over 8 Ohms and 500W over 4 Ohms with peak output current of 35W. On the other hand, specs alone may not tell the whole story: I have heard a few times M201 running out of steam On MagnePan 1.6 and Vienna Beethoven Grands. G.