D-Sonic peak current output compared to other


Hello,
I read this review on 6moons website about the D-Sonic M2-1500M amplifier and I think it is a very interesting amplifier. However, I am wondering about the "Peak Current Output" spec (30A) according to D-Sonic website, because I've read regarding the Current Headroom at Spectron , where it is said that those can deliver peak currents of 65 amps...
I'm very interested to read your thoughts about that.
cjug
" It suggests that your amps can make a peak power of over 4000 watts into one ohm, and over 16,000 watts if a 4 ohm speaker. "

Of course not. It suggests theoretically only with "ideal" power supplies. If it would be true in real life then any 100 wpc @8 Ohms amp you buy at Best Buy for $99.95 would produce 6400 watt at 0.1 Ohm load....

I doubt. While, our amps are stable at 0.1 Ohm load I am not sure what other amps on market can be stable at 0.1 Ohm load...

In real life we all limited by the design of our power supplies. As you may know we are pro audio mostly company and audiophile market is a "fun" part for us. We are building 8 kW contninious amp for Inter-M company (they allowed us to use their name) and adequate linear power supply should weight, if I recall, about a ton. So, we had to develop light switching power supplies for this amplifier.

But of course, you know all that !

Yours truly,
Simon
Simon,

Continuing with the Ampere discussion, what would be your recommendation in terms of electrical circuit capacity for a pair of monoblocks, high current amplifiers? Also, would it be different for 220Volt, 50Hz cases?

Best regards,
Carlos
Hello Carlos,

If I may suggest to you - I have published an article on the topic [its a bit simplify things, so I am sorry in advance...] where I use actual measurements of British engineer Keith Howard of the actual (peak) power consumed by difficult to drive speakers...during their reproduction of music and not on the test bench (what a revolutionary idea !):

http://www.enjoythemusic.com/magazine/manufacture/0708/index.html

I actually believe that real measure of POWER in power amplifier is in its headroom which is characterized not only by the peak current and peak voltage but also their duration and IMO, most importantly the level (and composition ) of distortions created by the amplifier.

So to answer your question you must know the power hunger of your speaker, room size, selected music and distance between speaker and listening chair...

Of course, for musical enjoyment (unless its hard rock) we need many more attributes which are beyond the questions raised in this thread.

All The Best

Simon
Simon, I noted the last comment in that article. You might be interested to know that there have been studies of how the brain reacts to music- and where that music is processed.

The studies were conducted by Dr. Herbert Melcher, a neuro-chemical scientist.

What his studies show is that there is a tipping point that occurs in the subconscious brain. Normally music is processed in the limbic portions of the brain (which is the source of emotional reaction). Unlike the conscious portions of the brain, the subconscious parts are not fooled by poor audio reproduction. There is a tipping point wherein if too many of the human hearing perceptual rules are violated, the processing moves from the limbic centers to the cerebral cortex (seat of the conscious brain).

I thought that you might find it interesting that he has some pretty hard numbers on this subjective experience :)

I see this as the tip of the iceberg. The more we know about how the ear/brain system perceives sound, the better we can make audio systems for musical reproduction. It seems pretty obvious that we want the limbic centers to do the work :)
Dear Athmosphere:

Thank you for Dr. Melecher info - I was not aware of that.

I am absolutely, totally, unconditionally agree with you and as you have read, this is what I wrote in article and you also probably noted that I quoted your writings a lot, particualrly in brain/sound interface !

I don;t know if you would agree with some of the premesis of my article that one of the main , if not the biggest, reasons why people experience "listening fatique' is the presence of DISTORTIONS !!!!!! (next is wrong matching etc)

One idiot/wiseman/audiophile (forgot his name - but obviosuly reviewer) wrote that "distortions of SET amplifiers are glorious"..... I am, on other had, the enemy of all distortions, glorious or not, did a lot of experiments with tube "glorious" distortions which support strongly this belief.

Probably the most accurare amplifiers today are correctly designed and PROPERLY used OTL amplifiers.

Thank you !!!

Simon