How can I protect ML 436 monoblocks amplifiers?

I contacted both MLevinson support, and they inform me to contact the ML distributor to Portugal, the company Genesis Technologies Iberica, but I didn't receive any reply from this company.

From the PS Audio I receive reply from Paul McGowan, and this was our conversation:

At my question, sent, the question of this topic, this the reply:

The P10 Power Plant would be perfect to make certain the voltage reaching the amplifiers is always 230 and to protect and improve their performance.

My reply:

The solution was 1 P10 for Both amplifiers or 1 for each amplifier?

And the other components? Cd PlayStation, record Player, pre- amplifier?

Each amplifier consumation was 560w

Again Paul reply:

You could use just one P10 but you'd be better off with 2. You can use the P10 to power the other units as well.

In the mean time my local dealer inform me that have a second hand unit of the Power Plant Premier to sell.
So I ask again to Paul if this unit cand handle to the ML 436 monobocks and receive this:

"Jose, this is a regenerator and works great for products. It should be able to handle up to about 1000 watts, so depending on how big your power amp is it should be fine. Highly recommended."

I had similar problems here with unstable voltage. I solved the problem with a Thor PS 10 power regulator conditioner. Below is the URL to the unit. http://thortechnologies.com.au/products/product/ps10-smart-power-station

A PS Audio P-10 power regenerator would be a very good solution to your problem.

There is a Multi Voltage Transformer made by Swallow company in Japan.
You need SWALLOW-SU-3000 (3000 Watts) Weight 22kg.
You can put the input at 240V/50Hz and get 230V/50Hz output.
This will protect your Amp very expensive about $850.